Product Description
Product Description
MAIN FEATURES:
1) Made of high quality material, non-rusting;Both flange and foot mounting available and suitable for all-round installation
2) Large output torque and high radiating efficiency
3)Precise grinding helical gear with Smooth running and low noise, no deformation,can work long time in dreadful condition
4)Nice appearance, durable service life and small volume, compact structure
5)Both 2 and 3 stage available with wide ratio range from 5 to 200
6)Different output shaft diameter available -40-50mm
7)Modular construction enlarge ratio from 5 to 1400
MAIN MATERIALS:
1)housing with aluminium alloyand cast iron material;
2)Output Shaft Material:20CrMnTi
3)Good quality no noise bearings to keep long service life
4)High performance oil seal to prevent from oil leakage
APPLICATIONS:
G3 Series helical gear motor are wide used for all kinds of automatic equipment, such as chip removal machine, conveyor, packaging equipment, woodworking machinery, farming equipment, slurry scraper ,dryer, mixer and so on.
Detailed Photos
Product Parameters
(n1=1400r/min 50hz) | |||||||||||||||||
norminal ratio | 5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 100 | 120 | 160 | 200 | ||
0.1kw | output shaft | Ø18 | Ø22 | ||||||||||||||
n2* (r/min) | 282 | 138 | 92 | 70 | 56 | 46 | 35 | 28 | 23 | 18 | 14 | – | 11 | 9 | 7 | ||
M2(Nm) | 50hz | 3.2 | 6.5 | 9.8 | 12.9 | 16.1 | 19.6 | 25.7 | 31.1 | 37.5 | 49.5 | 62.9 | – | 76.1 | 100.7 | 125.4 | |
60hz | 3 | 5 | 8 | 11 | 13 | 17 | 21 | 26 | 31 | 41 | 52 | – | 63 | 84 | 105 | ||
Fr1(N) | 588 | 882 | 980 | 1180 | 1270 | 1370 | 1470 | 1570 | 2160 | 2450 | 2450 | 2450 | 2450 | 2450 | 2450 | ||
Fr2(N) | 176 | ||||||||||||||||
norminal ratio | 5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 100 | 120 | 160 | 200 | ||
0.2kw | output shaft | Ø18 | Ø22 | Ø28 | |||||||||||||
n2* (r/min) | 282 | 138 | 92 | 70 | 56 | 45 | 35 | 29 | 23 | 18 | 14 | 13 | 12 | 8 | 7 | ||
M2(Nm) | 50hz | 6.5 | 12.6 | 19.1 | 26.3 | 32.6 | 38.9 | 50.4 | 63 | 75.6 | 100.8 | 103.9 | 125.4 | 150 | 200.4 | 250.7 | |
60hz | 5.4 | 10.5 | 16.6 | 21.9 | 27.1 | 32.4 | 42 | 52.5 | 63 | 84 | 86.6 | 104.5 | 125 | 167 | 208.9 | ||
Fr1(N) | 588 | 882 | 980 | 1180 | 1270 | 1760 | 1860 | 1960 | 2160 | 2450 | 2450 | 2840 | 3330 | 3430 | 3430 | ||
Fr2(N) | 196 | ||||||||||||||||
norminal ratio | 5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 100 | 120 | 160 | 200 | ||
0.4kw | output shaft | Ø22 | Ø28 | Ø32 | |||||||||||||
n2* (r/min) | 288 | 144 | 92 | 72 | 58 | 47 | 36 | 29 | 24 | 18 | 14 | 14 | 12 | 9 | 7 | ||
M2(Nm) | 50hz | 12.9 | 25 | 38.6 | 51.4 | 65.4 | 78.2 | 100.7 | 125.4 | 150 | 200.4 | 206.8 | 250.7 | 301.1 | 400.7 | 461.8 | |
60hz | 10.7 | 20.8 | 32.1 | 42.9 | 54.5 | 65.2 | 83.9 | 104.5 | 125 | 167 | 172.3 | 208.9 | 250.9 | 333.9 | 384.8 | ||
Fr1(N) | 882 | 1180 | 1370 | 1470 | 1670 | 2550 | 2840 | 3140 | 3430 | 3430 | 3430 | 4900 | 5880 | 5880 | 5880 | ||
Fr2(N) | 245 | ||||||||||||||||
norminal ratio | 5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 100 | 120 | 160 | 200 | ||
0.75kw | output shaft | Ø28 | Ø32 | Ø40 | |||||||||||||
n2* (r/min) | 278 | 140 | 94 | 69 | 58 | 46 | 35 | 29 | 24 | 18 | 14 | 14 | 11 | 9 | 7 | ||
M2(Nm) | 50hz | 24.6 | 48.2 | 72.9 | 97.5 | 122.1 | 145.7 | 187.5 | 235.7 | 282.9 | 376.1 | 387.9 | 439 | 527 | 703 | 764 | |
60hz | 20.5 | 40.2 | 60.7 | 81.3 | 201.8 | 121.4 | 156.3 | 196.4 | 235.7 | 313.4 | 323.2 | 366 | 439 | 585 | 732 | ||
Fr1(N) | 1270 | 1760 | 2160 | 2350 | 2450 | 4571 | 4210 | 4610 | 5490 | 5880 | 5880 | 7060 | 7060 | 7060 | 7060 | ||
Fr2(N) | 294 | ||||||||||||||||
norminal ratio | 5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | 100 | 120 | 160 | 200 | ||
1.5kw | output shaft | Ø32 | Ø40 | Ø50 | |||||||||||||
n2* (r/min) | 280 | 140 | 93 | 70 | 55 | 47 | 34 | 27 | 24 | 17 | 14 | 13 | 12 | 8 | 7 | ||
M2(Nm) | 50hz | 48.2 | 97.5 | 145.7 | 193.9 | 242.1 | 272 | 351 | 439 | 527 | 703 | 724 | 878 | 1060 | 1230 | 1230 | |
60hz | 40.2 | 81.3 | 121.4 | 161.6 | 201.8 | 226 | 293 | 366 | 439 | 585 | 603 | 732 | 878 | 1170 | 1230 | ||
Fr1(N) | 1760 | 2450 | 2840 | 3230 | 3820 | 5100 | 5880 | 7060 | 7060 | 7060 | 7060 | 9800 | 9800 | 9800 | 9800 | ||
Fr2(N) | 343 | ||||||||||||||||
norminal ratio | 5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 80 | 100 | ||||||
2.2kw | output shaft | Ø40 | Ø50 | ||||||||||||||
n2* (r/min) | 272 | 136 | 95 | 68 | 54 | 45 | 36 | 28 | 24 | 18 | 14 | ||||||
M2(Nm) | 50hz | 67 | 133 | 200 | 266 | 332 | 399 | 515 | 644 | 773 | 1571 | 1230 | |||||
60hz | 56 | 111 | 167 | 221 | 277 | 332 | 429 | 537 | 644 | 858 | 1080 | ||||||
Fr1(N) | 2160 | 3140 | 3530 | 4571 | 4700 | 6960 | 7250 | 8620 | 9800 | 9800 | 9800 | ||||||
Fr2(N) | 392 |
Outline and mounting dimension:
G3FM: THREE PHASE GEAR MOTOR WITH FLANGE (n1=1400r/min) | ||||||||||||||||||||
Power kw | output shaft | ratio | A | F | I | J | M | O | O1 | P | Q | R | S | T | U | W | X | Y | Y1 | |
standard | brake | |||||||||||||||||||
0.1kw | Ø18 | 5–30-40-50 | 236 | 270 | 192.5 | 11 | 16.5 | 170 | 4 | 10 | 30 | 145 | 35 | 18 | 20.5 | 129 | 6 | 157 | 80 | 81 |
Ø22 | -160-200 | 262 | 296 | 197.5 | 11 | 19 | 185 | 4 | 12 | 40 | 148 | 47 | 22 | 24.5 | 129 | 6 | 171.5 | 89.5 | 83.5 | |
0.2kw | Ø18 | 5- | 267 | 270 | 192.5 | 11 | 16.5 | 170 | 4 | 10 | 30 | 145 | 35 | 18 | 20.5 | 129 | 6 | 161 | 80 | 81 |
Ø22 | -80-100 | 293 | 296 | 197.5 | 11 | 19 | 185 | 4 | 12 | 40 | 148 | 47 | 22 | 24.5 | 129 | 6 | 171.5 | 89.5 | 83.5 | |
Ø28 | 306 | 309.5 | 208.5 | 11 | 23.5 | 215 | 4 | 15 | 45 | 170 | 50 | 28 | 31 | 129 | 8 | 198.5 | 105.5 | 88 | ||
0.4kw | Ø22 | 5- | 314 | 324.5 | 204 | 11 | 19 | 185 | 4 | 12 | 40 | 148 | 47 | 22 | 24.5 | 139 | 6 | 171.5 | 89.5 | 88.5 |
Ø28 | -80-100 | 330 | 337.5 | 215 | 11 | 23.5 | 215 | 4 | 15 | 45 | 170 | 50 | 28 | 31 | 139 | 8 | 198.5 | 105.5 | 93 | |
Ø32 | 349 | 357 | 229.5 | 13 | 28.5 | 250 | 4 | 15 | 55 | 180 | 60 | 32 | 35 | 139 | 10 | 234 | 126 | 98 | ||
0.75kw | Ø28 | 5- | 350.5 | 343.5 | 227.5 | 11 | 23.5 | 215 | 4 | 15 | 45 | 170 | 50 | 28 | 31 | 159 | 8 | 198.5 | 105.5 | 103 |
Ø32 | -80-100 | 379.5 | 387 | 242 | 13 | 28.5 | 250 | 4 | 15 | 55 | 180 | 60 | 32 | 35 | 159 | 10 | 234 | 126 | 108 | |
Ø40 | 401.5 | 408.5 | 270 | 18 | 34 | 310 | 5 | 18 | 65 | 230 | 71 | 40 | 43 | 185 | 12 | 284 | 149 | 126.5 | ||
1.5kw | Ø32 | 5- | 420.5 | 441 | 254 | 13 | 28.5 | 250 | 5 | 15 | 55 | 180 | 60 | 32 | 35 | 185 | 10 | 234 | 126 | 121 |
Ø40 | -80-100 | 457.5 | 478 | 270 | 18 | 34 | 310 | 5 | 18 | 65 | 230 | 71 | 40 | 43 | 185 | 12 | 284 | 149 | 126.5 | |
Ø50 | 485.5 | 506 | 300 | 22 | 40 | 360 | 5 | 25 | 75 | 270 | 83 | 50 | 53.5 | 185 | 14 | 325 | 173.5 | 132.5 | ||
2.2kw | Ø40 | 5- | 466.5 | 487 | 270 | 18 | 34 | 310 | 5 | 18 | 65 | 230 | 71 | 40 | 43 | 185 | 12 | 284 | 149 | 126.5 |
Ø50 | -80-100 | 510.5 | 531 | 300 | 22 | 40 | 360 | 5 | 25 | 75 | 270 | 83 | 50 | 53.5 | 185 | 14 | 325 | 173.5 | 132.5 |
G3LM: THREE PHASE GEAR MOTOR WITH FOOT (n1=1400r/min) | ||||||||||||||||||||
Power kw | output shaft | ratio | A | D | E | F | J | G | H | K | P | S | T | U | V | W | X | Y | Y1 | |
standard | brake | |||||||||||||||||||
0.1kw | Ø18 | 5–30-40-50 | 236 | 270 | 40 | 110 | 135 | 16.5 | 65 | 9 | 45 | 30 | 18 | 20.5 | 129 | 183 | 6 | 133 | 85 | 10 |
Ø22 | -160-200 | 262 | 296 | 65 | 130 | 155 | 19 | 90 | 11 | 55 | 40 | 22 | 24.5 | 129 | 193 | 6 | 139.5 | 90 | 12 | |
0.2kw | Ø18 | 5- | 267 | 270 | 40 | 110 | 135 | 16.5 | 65 | 9 | 45 | 30 | 18 | 20.5 | 129 | 183 | 6 | 133 | 85 | 10 |
Ø22 | -80-100 | 293 | 296 | 65 | 130 | 155 | 19 | 90 | 11 | 55 | 40 | 22 | 24.5 | 129 | 193 | 6 | 139.5 | 90 | 12 | |
Ø28 | 306 | 309.5 | 90 | 140 | 175 | 23.5 | 125 | 11 | 65 | 45 | 28 | 31 | 129 | 203 | 8 | 170 | 110 | 15 | ||
0.4kw | Ø22 | 5- | 314 | 324.5 | 65 | 130 | 155 | 19 | 90 | 11 | 55 | 40 | 22 | 24.5 | 139 | 199.5 | 6 | 141.5 | 90 | 12 |
Ø28 | -80-100 | 330 | 337.5 | 90 | 140 | 175 | 23.5 | 125 | 11 | 65 | 45 | 28 | 31 | 139 | 210 | 8 | 170 | 110 | 15 | |
Ø32 | 349 | 357 | 130 | 170 | 208 | 28.5 | 170 | 13 | 70 | 55 | 32 | 35 | 139 | 226 | 10 | 198 | 130 | 18 | ||
0.75kw | Ø28 | 5- | 350.5 | 343.5 | 90 | 140 | 175 | 23.5 | 125 | 11 | 65 | 45 | 28 | 31 | 159 | 222 | 8 | 170 | 110 | 15 |
Ø32 | -80-100 | 379.5 | 387 | 130 | 170 | 208 | 28.5 | 170 | 13 | 70 | 55 | 32 | 35 | 159 | 238.5 | 10 | 198 | 130 | 18 | |
Ø40 | 401.5 | 408.5 | 150 | 210 | 254 | 34 | 196 | 15 | 90 | 65 | 40 | 43 | 185 | 249 | 12 | 230 | 150 | 20 | ||
1.5kw | Ø32 | 5- | 420.5 | 441 | 130 | 170 | 208 | 28.5 | 170 | 13 | 70 | 55 | 32 | 35 | 185 | 250.5 | 10 | 198 | 130 | 18 |
Ø40 | -80-100 | 457.5 | 478 | 150 | 210 | 254 | 34 | 196 | 15 | 90 | 65 | 40 | 43 | 185 | 260 | 12 | 230 | 150 | 20 | |
Ø50 | 485.5 | 506 | 160 | 230 | 290 | 40 | 210 | 18 | 100 | 75 | 50 | 53.5 | 185 | 288 | 14 | 265 | 170 | 25 | ||
2.2kw | Ø40 | 5- | 466.5 | 487 | 150 | 210 | 254 | 34 | 196 | 15 | 90 | 65 | 40 | 43 | 185 | 260 | 12 | 230 | 150 | 20 |
Ø50 | -80-100 | 510.5 | 531 | 160 | 230 | 290 | 40 | 210 | 18 | 100 | 75 | 50 | 53.5 | 185 | 288 | 14 | 265 | 170 | 25 |
G3FS: IEC GEAR REDUCER WITH FOOT (n1=1400r/min) | |||||||||||||||||||||||||
Power kw | output shaft | ratio | A | B | C | F | I | J | L | M | N | O | O1 | P | Q | R | S | S1 | T | T1 | W | W1 | X | Y | Y1 |
0.12kw | Ø18 | 5–30-40-50 | 147 | 95 | 115 | 154 | 11 | 16.5 | 4.5 | 170 | 140 | 4 | 10 | 30 | 145 | 35 | 18 | 11 | 20.5 | 12.8 | 6 | 4 | 163 | 80 | 86.5 |
Ø22 | -160-200 | 173 | 95 | 115 | 164 | 11 | 19 | 4.5 | 185 | 140 | 4 | 12 | 40 | 148 | 47 | 22 | 11 | 24.5 | 12.8 | 6 | 4 | 171.5 | 89.5 | 89 | |
0.18kw | Ø18 | 5- | 147 | 95 | 115 | 154 | 11 | 16.5 | 4.5 | 170 | 140 | 4 | 10 | 30 | 145 | 35 | 18 | 11 | 20.5 | 12.8 | 6 | 4 | 163 | 80 | 86.5 |
Ø22 | -80-100 | 173 | 95 | 115 | 164 | 11 | 19 | 4.5 | 185 | 140 | 4 | 12 | 40 | 148 | 47 | 22 | 11 | 24.5 | 12.8 | 6 | 4 | 171.5 | 89.5 | 89 | |
Ø28 | 186.5 | 95 | 115 | 186 | 11 | 23.5 | 4.5 | 215 | 140 | 4 | 15 | 45 | 170 | 50 | 28 | 11 | 31 | 12.8 | 8 | 4 | 198.5 | 105.5 | 93.5 | ||
0.37kw | Ø22 | 5- | 181.5 | 110 | 130 | 164 | 11 | 19 | 4.5 | 185 | 160 | 4 | 12 | 40 | 148 | 47 | 22 | 14 | 24.5 | 16.3 | 6 | 5 | 201 | 89.5 | 99 |
Ø28 | -80-100 | 198 | 110 | 130 | 186 | 11 | 23.5 | 4.5 | 215 | 160 | 4 | 15 | 45 | 170 | 50 | 28 | 14 | 31 | 16.3 | 8 | 5 | 198.5 | 105.5 | 103.5 | |
Ø32 | 216.5 | 110 | 130 | 215 | 13 | 28.5 | 4.5 | 250 | 160 | 4 | 15 | 55 | 180 | 60 | 32 | 14 | 35 | 16.3 | 10 | 5 | 234 | 126 | 108.5 | ||
0.75kw | Ø28 | 5- | 206.5 | 130 | 165 | 185 | 11 | 23.5 | 4.5 | 215 | 200 | 4 | 15 | 45 | 170 | 50 | 28 | 19 | 31 | 21.8 | 8 | 6 | 216.5 | 105.5 | 123.5 |
Ø32 | -80-100 | 235 | 130 | 165 | 215 | 13 | 28.5 | 4.5 | 250 | 200 | 4 | 15 | 55 | 180 | 60 | 32 | 19 | 35 | 21.8 | 10 | 6 | 236.5 | 126 | 128.5 | |
Ø40 | 260.5 | 130 | 165 | 270 | 18 | 34 | 4.5 | 310 | 200 | 5 | 18 | 65 | 230 | 71 | 40 | 19 | 43 | 21.8 | 12 | 8 | 284 | 149 | 134 | ||
1.5kw | Ø32 | 5- | 252 | 130 | 165 | 215 | 13 | 28.5 | 4.5 | 250 | 200 | 5 | 15 | 55 | 180 | 60 | 32 | 24 | 35 | 27.3 | 10 | 8 | 236.5 | 126 | 128.5 |
Ø40 | -80-100 | 293.5 | 130 | 165 | 270 | 18 | 34 | 4.5 | 310 | 200 | 5 | 18 | 65 | 230 | 71 | 40 | 24 | 43 | 27.3 | 12 | 8 | 284 | 149 | 134 | |
Ø50 | 321.5 | 130 | 165 | 300 | 22 | 40 | 4.5 | 360 | 200 | 5 | 25 | 75 | 270 | 83 | 50 | 24 | 53.5 | 27.3 | 14 | 8 | 323.5 | 173.5 | 140 | ||
2.2kw | Ø40 | 5- | 290 | 180 | 215 | 270 | 18 | 34 | 5.5 | 310 | 250 | 5 | 18 | 65 | 230 | 71 | 40 | 28 | 43 | 31.3 | 12 | 8 | 284 | 149 | 134 |
Ø50 | -80-100 | 334 | 180 | 215 | 300 | 22 | 40 | 5.5 | 360 | 250 | 5 | 25 | 75 | 270 | 83 | 50 | 28 | 53.5 | 31.3 | 14 | 8 | 323.5 | 173.5 | 140 |
G3LS: IEC GEAR REDUCER WITH FOOT (n1=1400r/min) | |||||||||||||||||||||||||
Power kw | output shaft | ratio | A | B | C | D | E | F | G | H | J | K | L | N | P | S | S1 | T | T1 | W | W1 | X | Y | Y1 | Z |
0.12kw | Ø18 | 5–30-40-50 | 147 | 95 | 115 | 40 | 110 | 135 | 65 | 9 | 16.5 | 45 | 4.5 | 140 | 30 | 18 | 11 | 20.5 | 12.8 | 6 | 4 | 138.5 | 85 | 10 | M8 |
Ø22 | -160-200 | 173 | 95 | 115 | 65 | 130 | 154 | 90 | 11 | 19 | 55 | 4.5 | 140 | 40 | 22 | 11 | 24.5 | 12.8 | 6 | 4 | 141 | 90 | 12 | M8 | |
0.18kw | Ø18 | 5- | 147 | 95 | 115 | 40 | 110 | 135 | 65 | 9 | 16.5 | 45 | 4.5 | 140 | 30 | 18 | 11 | 20.5 | 12.8 | 6 | 4 | 138.5 | 85 | 10 | M8 |
Ø22 | -80-100 | 173 | 95 | 115 | 65 | 130 | 154 | 90 | 11 | 19 | 55 | 4.5 | 140 | 40 | 22 | 11 | 24.5 | 12.8 | 6 | 4 | 141 | 90 | 12 | M8 | |
Ø28 | 186.5 | 95 | 115 | 90 | 140 | 175 | 125 | 11 | 23.5 | 65 | 4.5 | 140 | 45 | 28 | 11 | 31 | 12.8 | 8 | 4 | 170 | 110 | 15 | M8 | ||
0.37kw | Ø22 | 5- | 181.5 | 110 | 130 | 65 | 130 | 154 | 90 | 11 | 19 | 55 | 4.5 | 160 | 40 | 22 | 14 | 24.5 | 16.3 | 6 | 5 | 151 | 90 | 12 | M8 |
Ø28 | -80-100 | 198 | 110 | 130 | 90 | 140 | 175 | 125 | 11 | 23.5 | 65 | 4.5 | 160 | 45 | 28 | 14 | 31 | 16.3 | 8 | 5 | 170 | 110 | 15 | M8 | |
Ø32 | 216.5 | 110 | 130 | 130 | 170 | 208 | 170 | 13 | 28.5 | 70 | 4.5 | 160 | 55 | 32 | 14 | 35 | 16.3 | 10 | 5 | 198 | 130 | 18 | M8 | ||
0.75kw | Ø28 | 5- | 206.5 | 130 | 165 | 90 | 140 | 175 | 125 | 11 | 23.5 | 65 | 4.5 | 200 | 45 | 28 | 19 | 31 | 21.8 | 8 | 6 | 186.5 | 110 | 15 | M10 |
Ø32 | -80-100 | 235 | 130 | 165 | 130 | 170 | 208 | 170 | 13 | 28.5 | 70 | 4.5 | 200 | 55 | 32 | 19 | 35 | 21.8 | 10 | 6 | 201.5 | 130 | 18 | M10 | |
Ø40 | 260.5 | 130 | 165 | 150 | 210 | 254 | 196 | 15 | 34 | 90 | 4.5 | 200 | 65 | 40 | 19 | 43 | 21.8 | 12 | 8 | 230 | 150 | 20 | M10 | ||
1.5kw | Ø32 | 5- | 252 | 130 | 165 | 130 | 170 | 208 | 170 | 13 | 28.5 | 70 | 4.5 | 200 | 55 | 32 | 24 | 35 | 27.3 | 10 | 8 | 201.5 | 130 | 18 | M10 |
Ø40 | -80-100 | 293.5 | 130 | 165 | 150 | 210 | 254 | 196 | 15 | 34 | 90 | 4.5 | 200 | 65 | 40 | 24 | 43 | 27.3 | 12 | 8 | 230 | 150 | 20 | M10 | |
Ø50 | 321.5 | 130 | 165 | 160 | 230 | 290 | 210 | 18 | 40 | 100 | 4.5 | 200 | 75 | 50 | 24 | 53.5 | 27.3 | 14 | 8 | 265 | 170 | 25 | M10 | ||
2.2kw | Ø40 | 5- | 290 | 180 | 215 | 150 | 210 | 254 | 196 | 15 | 34 | 90 | 5.5 | 250 | 65 | 40 | 28 | 43 | 31.3 | 12 | 8 | 230 | 150 | 20 | M12 |
Ø50 | -80-100 | 334 | 180 | 215 | 160 | 230 | 290 | 210 | 18 | 40 | 100 | 5.5 | 250 | 75 | 50 | 28 | 53.5 | 31.3 | 14 | 8 | 265 | 170 | 25 | M12 |
Company Profile
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.Our leading products is full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.With fast delivery, superior after-sales service, advanced producing facility, our products sell well both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and the Middle East and so on.Our aim is to develop and innovate on the basis of high quality, and create a good reputation for reducers.
Workshop:
Exhibition
ZheJiang PTC Fair:
Packaging & Shipping
After Sales Service
1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other Service: Including modeling selection guide, installation guide, and problem resolution guide, etc
FAQ
1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:4000-5000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.
Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!
Application: | Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications |
---|---|
Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
Layout: | Coaxial |
Hardness: | Hardened Tooth Surface |
Installation: | Vertical or Horizontal Type |
Step: | Two Stage- Three Stage |
Samples: |
US$ 35/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
How to Choose a Helical Gearbox
Choosing the best helical gearbox is dependent on the type of application you want to use the gear for. You will need to consider the contact ratios and the total of profile shifts required.
Spur gears are more efficient than helical gears
Compared to helical gears, spur gears have straight teeth that are parallel to the axis of the gear. Because they are more efficient, spur gears are often used in low speed applications. However, helical gears are better for low-noise and high-speed applications. Despite their advantages, spur gears are also used in some devices.
Spur gears are not as resilient as other gears. They are less efficient at transmitting power over long distances, and they generate too much noise at high speeds. They also impose a radial load on bearings. They also produce significant vibration that can limit the maximum speed of operation.
Helical gears are better at transferring loads. They are used in a number of applications, including car transmissions, elevators, and conveyors. Helical gears also generate large amounts of thrust. They are also quieter than spur gears.
Unlike spur gears, helical gears use bearings to support their thrust load. They also have more teeth, so they can handle more load than spur gears. They can also be used in non-parallel shafts.
Helical gears are generally used in high-speed mechanical systems. They also have less wear on individual teeth and are quieter running than spur gears.
Helical gears are a refinement of spur gears. They are also used in the printing industry, elevators, and gearboxes for automobiles. They are often used in conjunction with a worm gear to distribute load. They have a higher speed capacity, but they are not as efficient as spur gears. They are used in some high-speed mechanical systems because they generate less noise and vibration.
Spur gears are commonly used in low-speed applications, like rack and pinion setups. Their design makes them more efficient at transmitting power, but they are less resilient than helical gears.
Design space is limited based on a required center distance, target gear ratio, and sum of profile shifts
Using statistically derived parameters, the authors performed a multi-objective optimization of the profile shift of two external cylindrical gears. The main objective of this study was to maximize efficiency and minimize the amount of power lost in the optimized space.
To do this, the authors used a multi-objective optimization algorithm that included all aspects of the optimal profile shift. The algorithm evaluates objective function over a series of generations to determine the best solution.
The multi-objective optimization algorithm was based on a verified optimization algorithm. This algorithm combines analytical pressure loads estimation with an effective method for calculating the deformations of the gear case. Using the aforementioned formulae, the authors were able to identify a feasible solution. The numerical calculations also showed that the corresponding specific sliding coefficients were perfectly balanced.
To identify the most efficient method for determining the profile shift, the authors selected the most efficient method based on the objectives of efficiency and mass. The efficiency objective was considered to be the largest given the small size of the resulting optimization space. This objective is useful in reducing wear failures.
The largest thermal treatment of a cylindrical gear is case hardening. The ISO/TR 4467:1982 standard provides a practical guide for gears. The largest radii of the pinion and wheel are rb1 and rb2. The ratio of tooth width to base circle diameter of the pinion is normally set to less than 1.
Sliding velocity increases as the distance from the pitch point increases in the line of action
Deflections of the involute profile of a helical gear occur due to the load on the teeth. However, the optimum pressure angle for the gear is not known.
The correct pressure angle for a helical gear cannot be calculated without a surface model. Assuming the pressure is uniform over the profile, a pressure angle of 20deg would be a good bet. However, this would require a mathematical model that can be derived from the Archard wear equation.
In general, the pressure angle will be influenced by the diameter, as well as the gear mesh geometry. It is important to know the actual angle of a helical gear since this will affect the curvature of the profile, the normal force, and the radial force.
The best way to measure the pressure angle is to consider the theoretical pitch diameter. If the pitch diameter is small, then the actual angle will be smaller. This will cause a gap between the flanks. However, it can also cause the gear to deform, leading to unexpected working behavior.
One interesting tangent is the pitch plane, an imaginary plane tangent to the pitch surfaces. The pitch plane is the plane perpendicular to the axial plane of the gear cross section. It is usually used as a reference point to calculate the transverse pressure angle.
The working pressure angle is the angle of the pressure line of the gear mesh. This angle is the same as the reference pressure angle, but the length of the contact line is reduced.
The best way to calculate the working pressure angle is to use the pressure line of the gear mesh. This will give a more accurate value. The actual angle of the pressure line is also related to the transmission ratio. This ratio is usually given as the nominal ratio of angular velocities. The actual velocities will fluctuate about this ratio.
Undercut of a helical gear tooth root
Having an undercut at the pinion root can affect the distribution of load along the line of contact of helical gears. This can result in higher than nominal loads on some teeth and amplitude modulated noise.
The tooth root is affected by a number of factors, including the shape of the tooth cutting tool. The cutting tool must be designed to avoid an undercut without reducing the number of teeth. This is achieved by a process called profile shifting.
Profile shift occurs when the cutting tool changes depth, thereby preventing an undercut. It is often used in the manufacturing process to achieve a greater overlap ratio. The higher the overlap ratio, the less variation there is between the contact lines. This reduces the dynamic tooth loads and reduces noise.
The profile shift is most often associated with the cutting tool tip. This is the point where the involute profile exits the gear, before the tip begins to taper. The involute profile can be defined for every transverse section of the gear face width. The boundary point is a point of tangency between the involute and root profiles.
The involute of a circle is a common way to define a gear-tooth profile. The involute is the path traced by the point on the line when rolling on a circle. It is a useful feature for cylindrical involute gears.
The helix angle is also important to the helical gear. It allows for greater contact capacity and increases the bending capacity of the gear. It must be included in specifications for helical teeth. The angle must be measurable and include the (+-) sign.
The bending strength of a tooth depends on the shape of the root. A large undercut reduces the strength of the tooth.
Contact ratios
Whether a helical gearbox is dynamic or steady-state, the contact ratio is a key factor. The total contact ratio defines the average number of teeth in contact in the plane of action. It is calculated by multiplying the transverse contact ratio with the overlap ratio. The overlap ratio is always non-zero.
The total contact ratio must be 1.0 or greater for a constant speed rotation on the driven side. Gears with a low total contact ratio are known to slow down rotation of the driven gear. The total contact ratio is influenced by the length of the contact line. A high contact ratio is a good choice for dynamic loading.
A low contact ratio results in a greater amount of profile shift and a larger amount of noise. If the contact ratio is too high, it may cause excessive EAP sliding velocity and cause scuffing. In addition, an uneven load share results in amplitude modulated vibrations.
A helical gear is a pair of slim spur gears. The gears are layered in a plane that runs parallel to the face width of the gear teeth. Each gear tooth makes contact with the flank of the next gear tooth. The helical gear tooth flank is a 3-dimensional surface that is a tangent to the base circles of the gears.
The tooth shape of the helical gear tooth is also a key factor in the contact ratio. The tooth form is designed to be in relation to the work piece, tooling, dedendum coefficients, tooth forces, and tooth bending stiffness. A gear tooth form must also relate to tooth surface kinematics and microgeometry modifications.
The active profile is a region of the involute profile between the start and end points. A tooth profile that satisfies the basic law of gear-tooth action is often called a conjugate profile.
editor by CX 2023-10-21
China TA Shaft Mounted Gearbox Gear Reducer with Electric Motor Parallel Reducer Concrete Mixer speed reduce with Best Sales
Applicable Industries: Creating Content Stores, Manufacturing Plant, Equipment Fix Shops, Food & Beverage Manufacturing unit, Building works , Vitality & Mining
Gearing Arrangement: Helical
Output Torque: up to 17000KN.m
Input Speed: up to 2000rpm
Output Speed: up to 400rpm
Item name: shaft mounted reducer
Color: Grey RAL7031/7040,blue RAL5571
Guarantee: 1 Year
Software: Foodstuff ,Plastic, Convery, Equipment, Feed, Mining and so on
Certificate: ISO9001 , CE
Mounting Position: Horizontal (Foot Mounted, Shaft Mounted)
Packing: Picket Box
Ratio: 5.36~197.37
Bearing: C&U, Personalized large precision mental carbon metal equipment for CNC turning equipment NAK, NSK,SKF
OEM service: OEM services
Packaging Specifics: Plywood case
Port: HangZhou,ZheJiang
The RXG Series has extended has long been recognized as a very best vendor for quarry and mine apps where absolute reliability and low routine maintenance are essential factors. One more profitable element is the backstop option that stops back again driving in the situation of inclined conveyors. This gearbox can be concluded by selecting from a broad range of electric powered motors fully manufactured by REDSUN.
Redsun Rxg Series Shaft Mounted Hanging Gear Speed Reducer | |||||
Variety | Ratio | Design | Common bore (mm) | Rated electrical power(KW) | Rated torque(N.m) |
RXG collection | 571012.515202531 | RXG30 | 30 | 3 | 180 |
RXG35 | 35 | 5.5 | 420 | ||
RXG40 | forty forty five | 15 | 950 | ||
RXG45 | forty five 50 55 | 22.five | 1400 | ||
RXG50 | fifty Automation Machine Electrical Equipment Complete Turning flywheel ring equipment pinnuyam inside ring gear 32holes 55 sixty | 37 | 2300 | ||
RXG60 | 60 65 70 | fifty five | 3600 | ||
RXG70 | 70 eighty five | seventy eight | 5100 | ||
RXG80 | 80 one hundred | one hundred ten | 7000 |
Q: How lengthy is your supply time?A: Normally it is 5-ten times if the products are in stock. or it is fifteen-twenty days if the products are not in stock.
Q: Can we purchase 1 computer of each and every item for good quality testing?A: Yes, we are happy to take trial purchase for top quality testing.
Q: What is your phrases of payment ?A: Payment=1000USD, thirty% T/T in progress, stability prior to shippment.If you have other question, freely to speak to us, Substantial Promoting Industrial Use Minimal Upkeep Planetary Helical Gearbox At Best Cost From India you should.
Choosing a Gearbox For Your Application
The gearbox is an essential part of bicycles. It is used for several purposes, including speed and force. A gearbox is used to achieve one or both of these goals, but there is always a trade-off. Increasing speed increases wheel speed and forces on the wheels. Similarly, increasing pedal force increases the force on the wheels. This makes it easier for cyclists to accelerate their bicycles. However, this compromise makes the gearbox less efficient than an ideal one.
Dimensions
Gearboxes come in different sizes, so the size of your unit depends on the number of stages. Using a chart to determine how many stages are required will help you determine the dimensions of your unit. The ratios of individual stages are normally greater at the top and get smaller as you get closer to the last reduction. This information is important when choosing the right gearbox for your application. However, the dimensions of your gearbox do not have to be exact. Some manufacturers have guides that outline the required dimensions.
The service factor of a gearbox is a combination of the required reliability, the actual service condition, and the load that the gearbox will endure. It can range from 1.0 to 1.4. If the service factor of a gearbox is 1.0, it means that the unit has just enough capacity to meet your needs, but any extra requirements could cause the unit to fail or overheat. However, service factors of 1.4 are generally sufficient for most industrial applications, since they indicate that a gearbox can withstand 1.4 times its application requirement.
Different sizes also have different shapes. Some types are concentric, while others are parallel or at a right angle. The fourth type of gearbox is called shaft mount and is used when mounting the gearbox by foot is impossible. We will discuss the different mounting positions later. In the meantime, keep these dimensions in mind when choosing a gearbox for your application. If you have space constraints, a concentric gearbox is usually your best option.
Construction
The design and construction of a gearbox entails the integration of various components into a single structure. The components of a gearbox must have sufficient rigidity and adequate vibration damping properties. The design guidelines note the approximate values for the components and recommend the production method. Empirical formulas were used to determine the dimensions of the various components. It was found that these methods can simplify the design process. These methods are also used to calculate the angular and axial displacements of the components of the gearbox.
In this project, we used a 3D modeling software called SOLIDWORKS to create a 3-D model of a gear reducer. We used this software to simulate the structure of the gearbox, and it has powerful design automation tools. Although the gear reducer and housing are separate parts, we model them as a single body. To save time, we also removed the auxiliary elements, such as oil inlets and oil level indicators, from the 3D model.
Our method is based on parameter-optimized deep neural networks (DBNs). This model has both supervised and unsupervised learning capabilities, allowing it to be self-adaptive. This method is superior to traditional methods, which have poor self-adaptive feature extraction and shallow network generalization. Our algorithm is able to recognize faults in different states of the gearbox using its vibration signal. We have tested our model on two gearboxes.
With the help of advanced material science technologies, we can now manufacture the housing for the gearbox using high-quality steel and aluminium alloys. In addition, advanced telematics systems have increased the response time of manufacturers. These technologies are expected to create tremendous opportunities in the coming years and fuel the growth of the gearbox housing market. There are many different ways to construct a gearbox, and these techniques are highly customizable. In this study, we will consider the design and construction of various gearbox types, as well as their components.
Working
A gearbox is a mechanical device that transmits power from one gear to another. The different types of gears are called planetary gears and are used in a variety of applications. Depending on the type of gearbox, it may be concentric, parallel, or at a right angle. The fourth type of gearbox is a shaft mount. The shaft mount type is used in applications that cannot be mounted by foot. The various mounting positions will be discussed later.
Many design guidelines recommend a service factor of 1.0, which needs to be adjusted based on actual service conditions. This factor is the combined measure of external load, required reliability, and overall gearbox life. In general, published service factors are the minimum requirements for a particular application, but a higher value is necessary for severe loading. This calculation is also recommended for high-speed gearboxes. However, the service factor should not be a sole determining factor in the selection process.
The second gear of a pair of gears has more teeth than the first gear. It also turns slower, but with greater torque. The second gear always turns in the opposite direction. The animation demonstrates this change in direction. A gearbox can also have more than one pair of gears, and a first gear may be used for the reverse. When a gear is shifted from one position to another, the second gear is engaged and the first gear is engaged again.
Another term used to describe a gearbox is “gear box.” This term is an interchangeable term for different mechanical units containing gears. Gearboxes are commonly used to alter speed and torque in various applications. Hence, understanding the gearbox and its parts is essential to maintaining your car’s performance. If you want to extend the life of your vehicle, be sure to check the gearbox’s efficiency. The better its functioning, the less likely it is to fail.
Advantages
Automatic transmission boxes are almost identical to mechanical transmission boxes, but they also have an electronic component that determines the comfort of the driver. Automatic transmission boxes use special blocks to manage shifts effectively and take into account information from other systems, as well as the driver’s input. This ensures accuracy and positioning. The following are a few gearbox advantages:
A gearbox creates a small amount of drag when pedaling, but this drag is offset by the increased effort to climb. The external derailleur system is more efficient when adjusted for friction, but it does not create as little drag in dry conditions. The internal gearbox allows engineers to tune the shifting system to minimize braking issues, pedal kickback, and chain growth. As a result, an internal gearbox is a great choice for bikes with high-performance components.
Helical gearboxes offer some advantages, including a low noise level and lower vibration. They are also highly durable and reliable. They can be extended in modular fashion, which makes them more expensive. Gearboxes are best for applications involving heavy loads. Alternatively, you can opt for a gearbox with multiple teeth. A helical gearbox is more durable and robust, but it is also more expensive. However, the benefits far outweigh the disadvantages.
A gearbox with a manual transmission is often more energy-efficient than one with an automatic transmission. Moreover, these cars typically have lower fuel consumption and higher emissions than their automatic counterparts. In addition, the driver does not have to worry about the brakes wearing out quickly. Another advantage of a manual transmission is its affordability. A manual transmission is often available at a lower cost than its automatic counterpart, and repairs and interventions are easier and less costly. And if you have a mechanical problem with the gearbox, you can control the fuel consumption of your vehicle with appropriate driving habits.
Application
While choosing a gearbox for a specific application, the customer should consider the load on the output shaft. High impact loads will wear out gear teeth and shaft bearings, requiring higher service factors. Other factors to consider are the size and style of the output shaft and the environment. Detailed information on these factors will help the customer choose the best gearbox. Several sizing programs are available to determine the most appropriate gearbox for a specific application.
The sizing of a gearbox depends on its input speed, torque, and the motor shaft diameter. The input speed must not exceed the required gearbox’s rating, as high speeds can cause premature seal wear. A low-backlash gearbox may be sufficient for a particular application. Using an output mechanism of the correct size may help increase the input speed. However, this is not recommended for all applications. To choose the right gearbox, check the manufacturer’s warranty and contact customer service representatives.
Different gearboxes have different strengths and weaknesses. A standard gearbox should be durable and flexible, but it must also be able to transfer torque efficiently. There are various types of gears, including open gearing, helical gears, and spur gears. Some of the types of gears can be used to power large industrial machines. For example, the most popular type of gearbox is the planetary drive gearbox. These are used in material handling equipment, conveyor systems, power plants, plastics, and mining. Gearboxes can be used for high-speed applications, such as conveyors, crushers, and moving monorail systems.
Service factors determine the life of a gearbox. Often, manufacturers recommend a service factor of 1.0. However, the actual value may be higher or lower than that. It is often useful to consider the service factor when choosing a gearbox for a particular application. A service factor of 1.4 means that the gearbox can handle 1.4 times the load required. For example, a 1,000-inch-pound gearbox would need a 1,400-inch-pound gearbox. Service factors can be adjusted to suit different applications and conditions.
editor by czh2023-03-17
China Speed Gear Motor Reduction Variator Spiral Bevel Helical Shaft Mounted Cycloidal Transmission Marine Servo Planetary Winch Wheel Drive Nmrv Worm Reducer Gearbox helical angle gearbox
Merchandise Description
Velocity Equipment Motor Reduction Variator Spiral Bevel Helical Shaft Mounted Cycloidal Transmission Maritime Servo Planetary Winch Wheel Travel Nmrv Worm Reducer Gearbox
Organization Profile
We are a skilled organization engaged in the R&D, design and style, and production of gearboxes. The business has introduced a variety of advanced production and testing gear. We have productively designed 800Nm-11200Nm planetary gearboxes for development machinery, specific planetary gearboxes for mixers, unique planetary gearboxes for properties, specific reducers for mines, wind electrical power reducers, hydraulic rotary, winch collection, gearboxes for rolling mills, and other series of gearboxes with hundreds of thousands of technical specs. The goods have been extensively utilized in creating components, metallurgy, engineering machinery, hoisting, delivery, chemical, pharmaceutical, electrical energy, and other supporting units and engineering initiatives.
Since its institution, the organization has been accelerating the speed of scientific and technological innovation and unbiased model construction to construct its main competitiveness with new thinking and new producing recognition.
Our Equipments
Certification
Packaging and Shipment
Solution Description
Agricultural gearbox:
Flail mower gearbox, rotary tiller gearbox, lawn mower gearbox, rotary cutter gearbox, agricultural sprayer gearbox, put up hole digger gearbox, feed mixer gearbox, rotary mower gearbox, gearbox for round saws, irrigation reels gearbox, agricultural generator gearbox, fertilizer spreader gearbox, hydraulic push gearbox, manure spreader gearbox, rotary rakes gearbox, hay tedders gearbox, micro tiller gearbox, cutter bars gearbox, fertilizer mixer gearbox, agitators gearbox for sewage, spherical baler gearbox, snowblower gearbox
Planetary gearbox:
–Gear speed reducer for tracked motor vehicle
–Equipment velocity reducer for winch
–Planetary equipment reducer for wheeled motor vehicle
–Planetary slewing generate
–Planetary gear reducer for wind turbines
–Inline planetary gear reducer
–Proper angle gear push
–Planetary gearbox feed mixer drive
Industrial gearbox
Worm gearbox: RV collection, WP sequence, SWL sequence screw jack, VF series
Helical gearbox: R/F/K/S collection, HB collection, BKM series, RC collection, SMR shaft mounted gearbox, TA shaft mounted gearbox
Cycloidal gearboxes: BL/XL flange vertical set up double shaft sort, BW/XW baseboard horizontal mounted double shaft sort, BLD/XLD flange vertical put in motor immediate-link kind, BWD/XWD baseboard horizontal installed motor immediate-connection type
Large precision planetary gearbox
Software
Agriculture & Forestry | Business & Mining | Meals Processing |
|
|
|
Transport | Maritime Affairs | Wind Strength |
|
|
|
The set up and dimensions of the planetary gearbox are designed in rigorous accordance with the specifications of Italian and American makers so that they can be interchanged with the adhering to series of planetary gearboxes. Functionality and relationship proportions. They are excellent substitutes for these makes.
trasmital bonfiglioli, revini riduttori, rexroth, reggiana riduttori, rossi, zollern
Associated Products–Transmission areas
Push shafts
For much more reducers and mechanical components, make sure you click listed here to check out
US $10-800 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
---|---|
Function: | Distribution Power, Speed Changing, Speed Reduction |
Layout: | Planetary |
Hardness: | Hardened Tooth Surface |
Installation: | Planetary Reducer |
Step: | Planetary Drive |
###
Agriculture & Forestry | Industry & Mining | Food Processing |
|
|
|
Transport | Maritime Affairs | Wind Energy |
|
|
|
US $10-800 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
---|---|
Function: | Distribution Power, Speed Changing, Speed Reduction |
Layout: | Planetary |
Hardness: | Hardened Tooth Surface |
Installation: | Planetary Reducer |
Step: | Planetary Drive |
###
Agriculture & Forestry | Industry & Mining | Food Processing |
|
|
|
Transport | Maritime Affairs | Wind Energy |
|
|
|
What Is a Helical Gearbox?
Basically, a gearbox is a rotating circular machine part that consists of toothed components, which mesh together. Its function is to transfer speed and torque to other parts of the machine. It is also similar to a lever, and operates on the same principle.
Double helical gears
Having a helical gearbox has many advantages, including higher efficiency, high strength, and a superior gear system. However, it has its drawbacks. One of these drawbacks is the axial thrust. Axial thrust is not a problem with single helical gears, but it is a problem with double helical gears.
In double helical gears, there are two sets of teeth that are arranged in a V-shape. In one set of teeth, there is a groove that enables the axial force to be cancelled out. The groove eliminates the need for thrust bearings and allows for efficient handling of high capacity power transmission.
Aside from the axial thrust, there are also issues with face contact. Asymmetric load sharing and oscillation put substantial alternating loads on the shaft bearings. These alternating loads can lead to early bearing failure.
Fortunately, helical gears are smoother than spur gears, which means they can withstand more load. They also have greater pitch circle diameter than spur gears. However, they are limited in their scope. The pitch error distribution on the helical gears is typically limited to 50 mm peak-to-peak amplitude. It is important to control the phase difference of oncoming gears with high accuracy.
Typically, the helical gears that are used in a gear box are assembled from the same module. This allows for interchangeability of components and economical construction. A normal module set can use the same tooth-cutting tools that are used for spur gears.
Double helical gears are used in power transmission in fluid pumps and gas turbines. They are also commonly used in planetary reduction gear boxes for engines in civil aviation.
Generally, double helical gears are larger than single helical gears. They are typically generated from a special generator. They are also more expensive.
However, manufacturers are looking to find gears that are more convenient to use. One solution is to manufacture double helical gears on a multi-tasking machine tool. This allows the gear to be machined in complicated shapes.
The multi-tasking machine tool can also modify the tooth surface. This is useful for 3D printing helical gears with a high level of accuracy.
Crossed-axis helical gears
Several factors affect the performance of crossed-axis helical gears. One of the important factors is the position of the gears on the cross shaft. The gears will not perform properly if they are not oriented in a different direction.
Crossed-axis helical gears have a special situation, in which they will not function properly if the gears are oriented in the same direction. This is especially true for automobile oil pump/distribution shafts. Depending on the situation, gears will operate as a normal helical gear or as a spur gear.
Compared to spur gears, crossed-axis helical gears have relatively higher capacity. However, the transverse contact ratio of these gears is reduced. This decrease is dependent on the pressure angle. The pressure angle affects the curvature radii of the teeth. In addition, the length of the contact line is reduced. This shortens the efficiency of the gear.
Helix angle of crossed-axis helical gears is 45 degrees. It may be a left-handed or a right-handed gear. The pitch circle diameter of a helical gear may be big compared to that of a spur gear. This is due to the fact that the gears are cut at an angle to the shaft.
In the axial direction, the meshing of helical gears is very similar to spur gears. However, there are a few design rules to optimize these gears.
The first rule is that the gears must be staggered in opposite directions. If the gears are not staggered, the contact lines cannot be changed.
The second rule states that the pitch of a helical gear is dependent on its helix angle. It is possible to calculate the pitch circle of a helical gear, by integrating along the face width. In addition, the length of the contact lines decreases as the pressure angle increases. However, this decrease is not as large as that of a spur gear.
Right angle helical gears
Choosing a right angle helical gearbox can be difficult. With so many types, sizes, and configurations to choose from, it can be difficult to figure out which one is right for your application. The key to choosing the right gearbox is understanding your application and what factors are most important to you.
For example, if you are looking for a gearbox that can be used in a high-speed, high-torque application, the most important consideration is the efficiency of the product. Right-angle gearboxes are compact and easy to maintain, making them ideal for high-torque applications.
Some applications that require high-torque gears include pulp and paper manufacturing, food processing, mining, and car washes. Some of the advantages of right angle gears include high efficiency, low maintenance, and low noise. If you are in the market for a right angle helical gearbox, make sure to select a supplier that can provide you with a wide range of options.
Right-angle helical gearboxes come in several different bevel configurations. Spiral bevel gears require precision and are difficult to manufacture. However, they can be used interchangeably. Spiral miter gears are designed to rotate in the same direction as the input shaft, which helps ensure a smooth, direct transfer of power.
If you are considering a helical gearbox for a high-speed application, you will need to know your preferred input/output ratio. The standard ratios are 1:1 and 2:1. If you need a step-up ratio, you can install an additional output shaft opposite the input shaft.
Other benefits include lower running noise, superior strength, and durability. Because they are made of larger teeth, helical gears are less likely to wear out. Also, helical gears provide higher power carrying capacity.
To determine which type of right angle gearbox is best suited for your application, you should discuss your needs with your supplier. They should be able to offer a wide range of options, including custom solutions. They should also provide you with a list of past clients and online reviews.
To find a right angle helical gearbox that can meet your needs, it’s important to understand the various design features. For example, you should make sure that your gearbox has a self-locking capability, which means that the load cannot drive the worm. Having a self-locking gearbox also means that you do not need to install a braking system.
Spiral teeth
Using helical gearboxes to drive a motor car or truck is an efficient method of power transmission. However, the efficiency of this method depends on the helix angle of the gear. The helix angle is the angle that the gear teeth are cut at.
Helical gearboxes may be of different helix angles, depending on the specific gear set. The helix angle can vary between 15 and 30 degrees. This is important because the helix angle has a significant effect on the position of tooth contact. If the contact is not in a proper position, then there will be a large amount of vibration. This will affect the speed of the gear.
Helical gearboxes can be of two types: crossed axis and parallel axis. Crossed axis gears are usually used to connect parallel shafts. They have the same center gap as spur gears. On the other hand, parallel axis gears are usually used to drive a motor. The difference between the two types of gearboxes is their design and arrangement.
In addition to the helix angle, the gears may have different fillet, teeth, and radius. This means that the gear will have different NVH characteristics. In addition, there are different types of spiral teeth that may be used in the gearbox.
Hypoid gears are also similar to spiral bevel gears, but they differ in that the axes of the gear shaft do not intersect the axis of the hypoid gear. The hypoid gear exerts a very high thrust load on the bearings.
When compared to a straight bevel gear, the hypoid gear experience a smoother, less noisy operation. They also produce less shock loading.
Spiral bevel gears are also designed to produce less vibration. They are also more cost-effective. However, they require a larger diameter to transmit the same torque. This can lead to a reduced mechanical efficiency and lower fuel economy.
The best spiral bevel gears can carry a higher thrust load than straight teeth. This is why they are preferred for applications that require heavy load efficiency.
They are also appreciated for their NVH characteristics. They are also a quieter option for applications that require high speed. Helical gears can be used in many different industries. The food, automotive, and oil industries are examples of these types of gears.
editor by czh 2023-01-07
China Planetary Gear Reducer Low Noise High Efficiency Parallel Shaft Helical Gearbox helical gearbox for motor
Item Description
If you need to have to customize non-regular gearbox,
we can personalized dependent on drawings or samples!
Solution Description
Make Specifics
About Us
Xihu (West Lake) Dis. HangZhou Reducer Co., Ltd. is a national massive-scale enterprise, a national second-amount business, a national innovative business in subject management, and 1 of the five hundred largest equipment sector enterprises in China. Our business has far more than 100 sets of manufacturing equipment for various varieties of reducers, and the products are divided into much more than a dozen groups and hundreds of designs.
Mainly which includes WH sequence arc cylindrical worm reducer, CW sequence arc cylindrical worm reducer, SCW shaft-mounted arc tooth worm equipment reducer, WD WS sequence cylindrical worm reducer, SWL sequence JWM sequence worm equipment elevate, aircraft secondary envelope toroidal worm reducer, TP sequence envelope worm reducer, PW collection envelope reducer, CW series modular reducer, ZQQH ZQSH ZD ZL ZS Z Cylindrical gear reducer, ZDY ZLY Layout and improvement of ZSY tough tooth floor equipment reducer, X/B collection planetary cycloidal needle wheel reducer, 8000 collection planetary cycloidal reducer and other non-standard items.
Our manufacturing unit has a complete high quality, setting, occupational CZPT and basic safety 3 significant administration method collection certification, and has a large number of advanced products and screening devices at home and overseas this sort of as Niles forming and grinding equipment imported from Germany, OKUMA horizontal machining center, gear tests middle and coordinate measuring instrument imported from Japan.
RFQ
Q:What information should I tell you to affirm pace reducer?
A: Product/Dimension, Transmission Ratio, Shaft instructions & Order quantity.
Q:What if I don’t know which gear reducer I need?
A:Don’t be concerned, Ship as a lot info as you can, our team will support you uncover the proper 1 you are seeking for.
Q:What is the MOQ?
A: It is Ok for 1 or small pieces trial purchase for top quality screening.
Q:Who I should contact?
A:Remember to contact Hao Zhang if you want much more assist.
Q:How prolonged should I wait for the feedback soon after I send the inquiry?
A: Inside twelve hrs
Q:What is the payment term?
A:You can pay by way of T/T(30% in progress+70% just before delivery), L/C ,West Union and many others
Q:What is the delivery time?
A:Typically is twenty-30days right after get, for unique product or massive quantity you should e-mail to us for checking.
Q:What is the guarantee time?
A:12months
US $20-1,000 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | According to The Demand |
Gear Shape: | Cylindrical Gear |
Step: | Three-Step |
###
Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
US $20-1,000 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | According to The Demand |
Gear Shape: | Cylindrical Gear |
Step: | Three-Step |
###
Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
Helical Gearbox
Depending on the helical gearbox, it can be either Crossed-axis or Inline. Basically, helical gearboxes are composed of a set of toothed gears that mesh with other toothed parts to transmit torque and speed to other parts of the machine.
Right angle helical gearboxes
Choosing the right angle gearbox can be difficult. This is because the design and specifications will depend on the type of application. The right gearbox can make or break the efficiency of the system. For example, a right angle gearbox will need to be corrosion resistant if it is used in a washdown application. It may also require special grease for use in cold temperatures.
There are many different types of right angle gearboxes. The types include worm, hypoid, and spiral bevel gearboxes. The most common are worm gearboxes. These are a great option for applications that need high torque and power. However, they are not as efficient as spur gears.
Helical gearboxes are ideal for heavy-duty industrial applications such as conveyors, blowers, and elevators. They are quiet and have better speed capabilities than spur gears. They can handle larger loads because of their gradual engagement. They are also capable of adjusting the rotation angle by 90 degrees. They are also more efficient at high speeds.
Spiral bevel gearboxes require more precision to manufacture. They are also more expensive to produce. This is because the teeth need to be drilled and shaped to fit the shafts. The gearbox needs to be designed with tight tolerances and requires basic lubrication. Its operating cycle is long.
Helical gearboxes can be used in conjunction with other gearboxes. For example, the output shaft may be a hollow shaft, or it may be designed with dual counter-rotating shafts. They can also be designed to operate in either a clockwise or counter-clockwise direction.
Right angle gearboxes are ideal for high-speed applications. They require less maintenance than other industrial components. They may require corrosion resistant plating or stainless steel shafts. If you are considering a right angle gearbox, check with a distributor to see what types of products are available. A representative will be able to help you with installation. They may also offer custom gearbox solutions to fit your needs.
A gearbox is made up of four main components. These components include the input shaft, the output shaft, the gear, and the backlash.
Crossed-axis helical gears
Normally, helical gearboxes are used to increase torque between two rotating shafts. Compared to other types of gearboxes, helical gearboxes offer greater speed and power carrying capacity. They are also quieter and smoother in operation. These gearboxes are used in many industries such as food processing, plastic, rubber, and oil industries. These gears also have the advantage of being cheaper than spur gears.
These gears are designed with special teeth that are positioned at an angle to the face of the gear. As they rotate, the teeth engage gradually. They have longer teeth, which allow them to carry heavy loads. The contact area also increases as the gears rotate.
A cross axis helical gearbox is one of the most common types of gearboxes. This gearbox has an advantage over spur gears, since it uses bearings to support the thrust load. It can also adjust the rotation angle by 90 degrees. These gearboxes are typically used to drive automobile oil pump/distribution shafts. They are also used to drive blowers. They have a large thrust force.
The cross axis helical gearbox has the advantage of using bearings to support the thrust load. However, it also has the disadvantage of using a large amount of bearings. In addition, these gears are not suitable for speed reduction beyond 1:2.
Thermoplastic crossed axis helical gears are a convenient solution for high volume applications. These gears are self-locking and offer high torque. These gears are also very durable. They are also available in a variety of configurations and sizes. They are used in a wide range of industries, including the textile industry. The output torque of these gears is also very high.
Crossed helical gears are also used to transmit motion and power between perpendicular but non-intersecting shafts. To achieve this, two mating helical gears must have the same helix angle, pressure angle, and normal pitch. They should also be mounted on perpendicular but non-intersecting, parallel shafts.
To calculate the real radial pitch of a gear, the angle of cut is measured. The gear teeth are then cut at an angle to the face of the gear. The helix angle is also measured.
Inline helical gears
Unlike spur gears, helical gears have a large surface contact and are characterized by low noise and large torque. Moreover, helical gears also have a high degree of meshing performance. They are also compact and durable.
As the name suggests, helical gears are produced using hard steel teeth. They are also hobbed to ensure smooth running and accurate surface finish. In addition, all gearing is ground for increased efficiency.
Inline helical gearboxes are used in a number of applications, including waste water systems and in solvent extraction. They are also used in industries like power plants and food & tobacco. They have good efficiency and are low in cost. They also have interchangeability and high durability. They can be installed in a single piece aluminum alloy housing. They can also be foot mounted or flange mounted. They are available in single stage and three stage constructions.
Helical gearboxes are typically used in high-load applications, such as in cement and waste water systems. They are also suitable for industrial applications, including in manufacturing. They are also used in applications where there is a large speed variation range. They are suitable for a wide temperature range, from -10 degC to 40 degC.
A helical gearbox has a high degree of interchangeability, and can be installed with a wide range of motors. They are also available in flame proof versions. They can also be supplied with an integrated output flange. They have standard IEC inputs, making them easy to install and operate. They also have a removable inspection cover, which allows periodic inspection of gearing. They can also be supplied with integral mounting bases.
The transmission ratio of helical gearboxes is finely graded to meet different working conditions. They also have an output torque that ranges from 1.4-250. They are also available in a modular model, which allows them to be produced in an economical manner. They can also be installed with a standard IEC input, which makes them easy to fit with any IEC motor. They also have a permanent nameplate, which indicates the ratio and the output torque.
Helix angle
Using a helical gearbox is a more economical and efficient way of creating a gearbox. It is also beneficial for production because it allows for more interchangeable components. It can also be used in the oil and plastic industries. It has advantages over conventional gears because it runs quieter.
The helical gearbox is a type of gearbox that uses a helical cut on the teeth of the gears. It carries more surface contact than conventional gears, which increases the power carrying capacity. It is also more durable and quieter than conventional gears.
The helical gearbox is generally used in enclosed gear systems because it allows for higher tooth overlap and smoother performance. It also eliminates thrust forces. The helical gearbox can be made of two helical sections that are close together. It is common to use double helical gearboxes in enclosed gear systems. The gears can be ground and hardened.
The radial pitch of helical gears is about eight millimeters. In the helical gearbox, the radial pitch of the gears is the same as the pitch of the spur gears. Using the same tooth cutting tools, it is possible to make helical gears more economically.
The pitch of the helical gearbox will vary with the helix angle. Typically, the helix angle is between 15 and 30 degrees. The pitch will also change with the number of teeth in the spur gear. The pitch will increase when the number of teeth increases.
The pitch is also affected by the pressure angle of the tooth. The pressure angle affects the normal force and curvature radii. The length of the helical gear contact line decreases as the pressure angle increases. This can also be seen when considering contact on the tooth surface. The helix angle is also important when calculating the forces between the helical gears.
It is important to understand that helical gears generate axial forces within the gear-mesh. These forces need to be supported by bearings. They also generate heat. This heat is also detrimental to the efficiency of the gear. It can also cause power loss.
editor by czh 2023-01-02
China Nmrv Series Worm Gear Reducer Shaft Motor Speed Bevel Helical Gearbox with Best Sales
Product Description
Product description
NMRV Series Worm Gear Reducer Shaft Motor Speed Bevel Helical Gearbox
NRV |
030 |
040 |
050 |
063 |
075 |
090 |
110 |
130 |
150 |
B |
20 |
23 |
30 |
40 |
50 |
50 |
60 |
80 |
80 |
D1 |
9 j6 |
11 j6 |
14 j6 |
19 j6 |
24 j6 |
24 j6 |
28 j6 |
30 j6 |
35 j6 |
G2 |
51 |
80 |
74 |
90 |
105 |
125 |
142 |
162 |
195 |
G3 |
45 |
53 |
64 |
75 |
90 |
108 |
135 |
155 |
175 |
I |
30 |
40 |
50 |
63 |
75 |
90 |
110 |
130 |
150 |
b1 |
3 |
4 |
5 |
6 |
8 |
8 |
8 |
8 |
10 |
f1 |
– |
– |
M6 |
M6 |
M8 |
M8 |
M10 |
M10 |
M12 |
t1 |
10.2 |
12.5 |
16 |
21.5 |
27 |
27 |
31 |
33 |
38 |
NRV-NMRV |
030-040 |
030-050 |
030-063 |
040-075 |
040-090 |
050-105 |
050-110 |
063-130 |
063-150 |
B |
20 |
20 |
20 |
23 |
23 |
30 |
30 |
40 |
40 |
D1 |
9 j5 |
9 j6 |
9 j6 |
11 j6 |
11 j6 |
14 j6 |
14 j6 |
19 j6 |
19 j6 |
G2 |
51 |
51 |
51 |
60 |
00 |
74 |
74 |
90 |
90 |
I |
10 |
20 |
33 |
35 |
50 |
60 |
60 |
67 |
87 |
b1 |
3 |
3 |
3 |
4 |
4 |
5 |
5 |
6 |
6 |
f1 |
– |
– |
– |
– |
– |
M6 |
M6 |
M6 |
M6 |
t1 |
10.2 |
10.2 |
10.2 |
12.5 |
12.5 |
16 |
16 |
21.5 |
21.5 |
NMRV571
Weight without motor:0.7kg
Input size: ( Pm, Dm, bm, tm )
NMRV030
Weight without motor:1.2kg
Input size: ( Pm, Dm, bm, tm )
NMRV040 Output |
||
D H8 |
b |
t |
18 (19) |
6 (6) |
20.8 (21.8) |
(..)Only on request Weight without motor:2.3kg Input size (Pm, Dm, bm, tm) |
NMRV110
Weight without motor: 35kg
Input size: (Pm, Dm, bm, tm)
NMRV130
Weight without motor: 48kg
Input size: (Pm, Dm, bm, tm)
NMRV150
Weight without motor: 87.8kg
Input size: (Pm, Dm, bm, tm)
Features:
1) Aluminum alloy die-casted gearbox
2) Compact structure saves mounting space
3) Highly accurate
4) Runs forward and backward
5) High overload capacity
6) Stable transmission with reduced vibration and noise
Characteristics:
1. High quality aluminum alloy quadrate case .
2. High efficiency.
3. Small size, compact constructure and light weight.
4. Combination of 2 single-step worm gear speed reducers, meeting the requirements of super speed ratio.
Technical Data:
1. Input power: 0.06kW-15kW
2. Output torque: 7.8-1195N.m
3. Speed ratio: (5-100) 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100
4. Adapt for IEC, NEMA, SERVO
Materials:
1. From RV25 up to RV105: Aluminium alloy housing.
2. From RV110 to RV150: Cast iron housing.
3. Seal: CZPT Seal from ZheJiang
4. Bearing :homemade Bearing
Color:
1. RAL5571
2. Blue
3. Silver
Quality control:
1.Quality guarantee: 1 year
2.Certificate of quality: ISO9001:2008
3.Every product must be tested before packing
General Technical data:
Size number:25,30,40,50,63,75,90,110,130,150
Ratio:1/100-1/5000
Color:blue,silver,RAL5571 color
Material:housing -casting iron- HT200-250#/aluminum worm gear-KK alloy worm-20CrMnTi with carburizing and quenching,surface hardness is 58-62HRC shaft-chromium steel-45#
Packing: Inner pack: use plastic bag a Inner pack: use plastic bag and foam box, outer pack: carton or wooden case 1set/bag/carton or based on customer’s requestbearing: CZPT & Homemade bearing
Seal: CZPT seal from ZheJiang
Input power: 0.25kw,0.37kw,0.55kw,0.75kw,1.1kw,1.5kw,2.2kw,3.0kw,4.0kw,5.5kw,7.5kw
Lubricant:Synthetic & Mineral
IEC flange:56B5,63B5,71B5,80B5,90B5,100B5,112B5,132B5
Output form: solid shaft,hollow shaft weight: 0.7-87.8KGSapplication: In industrial machine:food Stuff,ceramics,chemical,packing,printing,dyeing,woodworking,glass and plastics
Warranty:1 year
Recommend product
NMRV Series Transmission Gearboxes
Gear Reducers For Belt Conveyor
Speed Worm Gear Reducer
HangZhou CZPT Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.
Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.
With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.
Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.
FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.
Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.
Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.
Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.
US $10-100 / Piece | |
100 Pieces (Min. Order) |
###
Shipping Cost:
Estimated freight per unit. |
To be negotiated| Freight Cost Calculator |
---|
###
Output Speed: | 17.5-186.7 R/Min |
---|---|
Applicable Industries: | Hotels, Manufacturing Plant |
Customized Support: | OEM, ODM |
###
Customization: |
Available
|
---|
###
NRV
|
030
|
040
|
050
|
063
|
075
|
090
|
110
|
130
|
150
|
B
|
20
|
23
|
30
|
40
|
50
|
50
|
60
|
80
|
80
|
D1
|
9 j6
|
11 j6
|
14 j6
|
19 j6
|
24 j6
|
24 j6
|
28 j6
|
30 j6
|
35 j6
|
G2
|
51
|
80
|
74
|
90
|
105
|
125
|
142
|
162
|
195
|
G3
|
45
|
53
|
64
|
75
|
90
|
108
|
135
|
155
|
175
|
I
|
30
|
40
|
50
|
63
|
75
|
90
|
110
|
130
|
150
|
b1
|
3
|
4
|
5
|
6
|
8
|
8
|
8
|
8
|
10
|
f1
|
–
|
–
|
M6
|
M6
|
M8
|
M8
|
M10
|
M10
|
M12
|
t1
|
10.2
|
12.5
|
16
|
21.5
|
27
|
27
|
31
|
33
|
38
|
###
NRV-NMRV
|
030-040
|
030-050
|
030-063
|
040-075
|
040-090
|
050-105
|
050-110
|
063-130
|
063-150
|
B
|
20
|
20
|
20
|
23
|
23
|
30
|
30
|
40
|
40
|
D1
|
9 j5
|
9 j6
|
9 j6
|
11 j6
|
11 j6
|
14 j6
|
14 j6
|
19 j6
|
19 j6
|
G2
|
51
|
51
|
51
|
60
|
00
|
74
|
74
|
90
|
90
|
I
|
10
|
20
|
33
|
35
|
50
|
60
|
60
|
67
|
87
|
b1
|
3
|
3
|
3
|
4
|
4
|
5
|
5
|
6
|
6
|
f1
|
–
|
–
|
–
|
–
|
–
|
M6
|
M6
|
M6
|
M6
|
t1
|
10.2
|
10.2
|
10.2
|
12.5
|
12.5
|
16
|
16
|
21.5
|
21.5
|
###
NMRV040 Output
|
||
D H8
|
b
|
t
|
18
(19)
|
6
(6)
|
20.8
(21.8)
|
(..)Only on request
Weight without motor:2.3kg
Input size (Pm, Dm, bm, tm)
|
US $10-100 / Piece | |
100 Pieces (Min. Order) |
###
Shipping Cost:
Estimated freight per unit. |
To be negotiated| Freight Cost Calculator |
---|
###
Output Speed: | 17.5-186.7 R/Min |
---|---|
Applicable Industries: | Hotels, Manufacturing Plant |
Customized Support: | OEM, ODM |
###
Customization: |
Available
|
---|
###
NRV
|
030
|
040
|
050
|
063
|
075
|
090
|
110
|
130
|
150
|
B
|
20
|
23
|
30
|
40
|
50
|
50
|
60
|
80
|
80
|
D1
|
9 j6
|
11 j6
|
14 j6
|
19 j6
|
24 j6
|
24 j6
|
28 j6
|
30 j6
|
35 j6
|
G2
|
51
|
80
|
74
|
90
|
105
|
125
|
142
|
162
|
195
|
G3
|
45
|
53
|
64
|
75
|
90
|
108
|
135
|
155
|
175
|
I
|
30
|
40
|
50
|
63
|
75
|
90
|
110
|
130
|
150
|
b1
|
3
|
4
|
5
|
6
|
8
|
8
|
8
|
8
|
10
|
f1
|
–
|
–
|
M6
|
M6
|
M8
|
M8
|
M10
|
M10
|
M12
|
t1
|
10.2
|
12.5
|
16
|
21.5
|
27
|
27
|
31
|
33
|
38
|
###
NRV-NMRV
|
030-040
|
030-050
|
030-063
|
040-075
|
040-090
|
050-105
|
050-110
|
063-130
|
063-150
|
B
|
20
|
20
|
20
|
23
|
23
|
30
|
30
|
40
|
40
|
D1
|
9 j5
|
9 j6
|
9 j6
|
11 j6
|
11 j6
|
14 j6
|
14 j6
|
19 j6
|
19 j6
|
G2
|
51
|
51
|
51
|
60
|
00
|
74
|
74
|
90
|
90
|
I
|
10
|
20
|
33
|
35
|
50
|
60
|
60
|
67
|
87
|
b1
|
3
|
3
|
3
|
4
|
4
|
5
|
5
|
6
|
6
|
f1
|
–
|
–
|
–
|
–
|
–
|
M6
|
M6
|
M6
|
M6
|
t1
|
10.2
|
10.2
|
10.2
|
12.5
|
12.5
|
16
|
16
|
21.5
|
21.5
|
###
NMRV040 Output
|
||
D H8
|
b
|
t
|
18
(19)
|
6
(6)
|
20.8
(21.8)
|
(..)Only on request
Weight without motor:2.3kg
Input size (Pm, Dm, bm, tm)
|
Types of Vehicle Gearboxes
In a vehicle, there are many types of gearboxes available. There are planetary gearboxes, Coaxial helical gearboxes, and skew bevel helical gearboxes, among others. In this article, we’ll cover all of them and help you determine which type of gearbox would be right for your vehicle. Also, we’ll discuss how each differs from the others.
planetary gearbox
A planetary gearbox is composed of three main components: a sun gear, an input bevel gear, and an output shaft. A planetary gearbox can have different output torques and ratios. The basic model of a planetary gearbox is highly efficient and transmits 97% of the power input. There are several kinds of planetary gearboxes, depending on the type of operation. In general, there are three types: the simple, the intermediate, and the complex.
The price of a planetary gearbox can vary a lot, and it’s important to know what you’ll need. Different manufacturers produce different planetary gearboxes, so check with a manufacturer to see what they have available. Make sure to check the quality of the planetary gearbox before making a final purchase. In addition, be sure to compare the prices and the availability of a particular product. A quality planetary gearbox will provide years of trouble-free operation and will not break your bank.
Planetary gears feature an integer number of teeth. Each planet has teeth that must mesh with its ring or sun. The number of planets, ring, and tooth count of each gear determine whether the teeth mesh. Some planets have fewer teeth than others, so they mesh better than others. However, compound planets can be more flexible and achieve higher reduction ratios. If you’re looking for a planetary gearbox for your next project, consider getting in touch with a manufacturer who specializes in this technology.
When it comes to construction, a planetary gearbox is no exception. It’s extremely important to choose the right planetary gear for your application, because an imbalance in the planet gear can cause increased wear and failure. Moreover, the compact size of a planetary gear ensures maximum heat dissipation. However, a planetary gear box may require cooling in some applications. A planetary gearbox will make your life easier, and it will give you years of trouble-free operation.
Straight bevel helical gearbox
The Straight bevel helical gearbox has a number of advantages, but it has a relatively short manufacturing process. Its most popular application is in the automotive industry, where it is used in many types of vehicles. Other applications include heavy and light equipment and the aviation and marine industries. Below is a brief introduction to this gearbox type. Read on to learn about its benefits. This type of gearbox is one of the easiest to manufacture.
The spiral bevel gear has larger teeth than straight bevel gears, resulting in a smoother, quieter rotation. It can handle high-speed heavy loads with less vibration. Spiral bevel gears are classified by their tooth form and cutting method. Straight bevel gears are easier to design and manufacture, but spiral bevel gears are more expensive. Both designs are suitable for high-speed, heavy-load operations, and general manufacturing applications.
In addition to being easy to install, the modular bevel gears have many advantages. They have an exceptionally high degree of interchangeability and feature the highest standards of component integrity. They can also be tailored to meet your specific requirements. The advantages of this gearbox type include high precision, optimum performance, and low noise. And because they are modular, they can be produced in a variety of finishes. These include stainless steel, titanium, and bronze.
Straight bevel helical gearbox manufacturers are committed to a high degree of precision in their designs. The radii, torques, and tooth profiles of straight bevel gears are more precisely measured than those of cylindrical bevel gears. The same calculations are used for all traditional bevel gear generators. This ensures that your 5-axis milled bevel gear sets have the same calculations and layout.
Coaxial helical gearbox
The Coaxial helical gearbox is a highly efficient transmission system that is well suited for light-duty applications. Compared to spur-type gearboxes, the real pitch of a Coaxial helical gearbox is low at all helix angles. This is because the coaxial type has the same number of teeth and center gap as the spur gearbox. Coaxial helical gearboxes also have a smaller footprint and are compact.
Several nations have implemented lockdown regulations for Industrial Gearbox trade, threatening the global economy. Several factors have been implicated in COVID-19, including supply chain, market, and financial markets. Experts are monitoring the situation globally and project remunerative prospects for gearbox manufacturers after the crisis. This report depicts the latest scenario and offers a comprehensive analysis of COVID-19’s impact on the entire industry.
This Coaxial helical gearbox features a compact structure and high precision gear. Its three-stage design combines two-stage gears with a single-stage gear, forging high-quality alloy steel for high precision and durability. The gears are serially-designed for easy interchangeability. They are also available in high-frequency heat-treated steel. A Coaxial helical gearbox is the perfect solution for many applications.
Coaxial helical gearboxes have the added benefit of using cylindrical gears instead of shafts. They operate quietly, and have more surface area to interact with. Their fixed angles make them suitable for heavy-duty applications, like in conveyors, coolers, and grinders. Compared to other gearbox types, Helical gearboxes have higher power-carrying capacity. Listed below are the benefits of a Coaxial Helical Gearbox
Skew bevel helical gearbox
A Skew bevel helical gear box is a common type of industrial gearbox. These gearboxes are rigid and compact and can be used in a variety of applications. They are commonly used in heavy-duty applications such as grinding mills, conveyors, and coolers. They are used in many applications to provide rotary motions between non-parallel shafts. They also have the added benefit of high-efficiency in a variety of industries.
Skew bevel helical gear boxes are suitable for heavy loads and are monolithic in construction. This type of gearbox combines the benefits of bevel and helical gears for right-angle torque, which makes it a popular choice for heavy-duty applications. In addition to being a robust and reliable gearbox, these gearboxes are highly customizable and can meet almost any industrial need.
To maximize the efficiency of bevel gears, FE-based tooth contact analysis is used to develop a sophisticated geometry optimization algorithm. The software also allows users to define optimal flank topography by introducing application-specific weightings for specific load levels. With this data, a manufacturing simulation is conducted to determine the best variant. A robust variant combines the benefits of efficiency, load-carrying capacity, and low excitation behavior.
The helical gear can be angled at 90 degrees. This is similar to a spur gear but produces less noise. It can achieve a nine-to-one speed reduction with one stage. However, a helical gear requires a larger driver gear for higher reductions. This gearbox is suitable for speeds from 1:1 to three times. They are often used in the manufacture of motors and generators.
Extruder helical gearbox
An extruder helical gearbox is one of the most common industrial gears. It is compact in size and low-power consuming, making it ideal for heavy-duty applications. Extruder helical gearboxes are suitable for a variety of industrial applications, including cement, plastics, rubber, conveyors, and coolers. In addition to its use in plastics and rubber manufacturing, this gearbox is also useful in other low-power applications such as crushers, coolers, and conveyors.
CZPT SG series Extruder Helical Gearboxes are available in Single Screw and Twin Screw Variations. These gears feature a compact design, high power density, and long service life. Axial bearing housing and thrust bearings are mounted on the input shafts. Extruder helical gearboxes can be installed in various positions, including horizontal, vertical, and inclined.
Helicoidal gears are often produced in a modular manner. This design provides multiple benefits, including engineering and performance advantages, modular production, and the highest level of component integrity. A single helical gearbox can be assembled into a larger gearbox if needed, but modular production ensures consistent performance and economy. This modular design is also cost-effective. It is a versatile and reliable solution for a wide range of applications.
In addition to its efficiencies, Extruder helical gearboxes also have a low noise profile. They have no squeal sounds, and they are silent when running. They can transfer more power than conventional gearboxes. This type of gear has been used in the manufacturing of high-quality plastic products for years. They are often used for applications in automotive transmissions. Aside from being quiet, helical gears have higher contact levels and lower vibration.
editor by czh 2022-12-01
in Yekaterinburg Russian Federation sales price shop near me near me shop factory supplier 3 Phase 220V 380V Bevel Helical Worm Helical Solid Shaft Hollow Shaft AC Right Angle Gear Motor manufacturer best Cost Custom Cheap wholesaler
The group is focused on producing all range of standard roller chains and sprockets, gears & gearboxes, this sort of as conveyor chain & sprockets , stainless steel chain, agricultural chain and has not just marketed its items all above china, but also marketed much more than 65% merchandise to oversees, which includes Europe, The usa, South-east Asia, and it also has established up storage logistics in places like Europe. We are hunting ahead to developing profitable organization associations with new customers about the world in the future. we provide chromed bar and tubes for hydualic and pheumatic cylinders. 3 Phase 220V 380V EPTTl EPTcal worm helical strong shaft hollow shaft AC RigEPTT Angle EPT EPT
Attributes:
1. Compact construction and basic assembly
2. Vast pace ranges and higher torque
three. Lower noise, good sealing functionality, higher efficiency
four. Steady and secure, EPTT life span, EPT
five. Multi-composition, a variety of assembling approaches
Item image:
Specification:
ANG EPTcal EPT EPT | |
Design | R17 ~ 187, F37-177, K37-187, S37-ninety seven |
Input EPTT | .06kw ~ 250kw |
Enter velocity | 750rpm ~ 3000rpm |
Reduction ratio | 1/1.three ~ 1/27000 |
Input motor | AC (one phase or three phase) / DC / BLDC motor |
Install type | Foot / Reliable shaft / Hollow shaft / Output flange #8230 |
Performance | ninety four% ~ ninety eight % for R F K sequence |
EPT of housing | die-solid EPT / Forged iron / Stainless metal |
EPT of EPT | Exact grinding, course six |
Warmth treatment method | Carburizing and quenching |
Equipment | Brake / Flange / EPT adapter / Torque arm #8230 |
FAQ
Q: Can you make the EPT motor with customization?
A: Sure, we can customise for every your ask for, like EPTT, voltage, pace, shaft measurement, flange, terminal box, IP grade, etc.
Q: Do you offer samples?
A: Of course. Sample is offered for screening.
Q: What is your MOQ?
A: It is 1pcs for the starting of our organization.
Q: What is your guide time?
A: StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd merchandise need 5-30days, a bit EPTTer for EPT goods.
Q: Do you offer EPT help?
A: Yes. Our business have design and deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment team, we can supply EPT support if you
want.
Q: How to ship to us?
A: It is accessible by air, or by sea, or by practice.
Q: How to shell out the money?
A: T/T and L/C is favored, with different currency, incXiHu (West EPT) Dis.Hu (West EPT) Dis. USD, EUR, RMB, etc.
Q: How can I know the merchandise is appropriate for me?
A: gt1ST affirm drawing and specification gt2nd test sample gt3rd begin mass manufacturing.
Q: Can I occur to your organization to go to?
A: Of course, you are welcome to visit us at any time.
Q: How shall we speak to you?
A: You can ship inquiry directly, and we will reply in 24 several hours.