Tag Archives: motor shaft

China Good quality Three Phase Gear Reduction Motor Helical Gearbox with Output Shaft Material 20crmnti double stage helical gearbox

Product Description

 

Product Description

MAIN FEATURES:
1) Made of high quality material,  non-rusting;Both flange and foot mounting available and suitable for all-round installation
2) Large output torque and high radiating efficiency
3)Precise grinding helical gear with Smooth running and low noise, no deformation,can work long time in dreadful condition
4)Nice appearance, durable service life and small volume, compact structure
5)Both 2 and 3 stage available with wide ratio range from 5 to 200
6)Different output shaft diameter available -40-50mm
7)Modular construction enlarge ratio from 5 to 1400

MAIN MATERIALS:
1)housing with aluminium alloyand cast iron material;
2)Output Shaft Material:20CrMnTi
3)Good quality no noise bearings to keep long service life
4)High performance oil seal to prevent from oil leakage

APPLICATIONS:
G3 Series helical gear motor are wide used for all kinds of automatic equipment, such as chip removal machine, conveyor, packaging equipment, woodworking machinery, farming equipment, slurry scraper ,dryer, mixer and so on.

Detailed Photos

Product Parameters

 

(n1=1400r/min  50hz)
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160   200   
0.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 92 70 56 46 35 28 23 18 14 11 9 7
M2(Nm) 50hz 3.2 6.5 9.8 12.9 16.1 19.6 25.7 31.1 37.5 49.5 62.9 76.1 100.7 125.4
60hz 3 5 8 11 13 17 21 26 31 41 52 63 84 105
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 92 70 56 45 35 29 23 18 14 13 12 8 7
M2(Nm) 50hz 6.5 12.6 19.1 26.3 32.6 38.9 50.4 63 75.6 100.8 103.9 125.4 150 200.4 250.7
60hz 5.4 10.5 16.6 21.9 27.1 32.4 42 52.5 63 84 86.6 104.5 125 167 208.9
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 144 92 72 58 47 36 29 24 18 14 14 12 9 7
M2(Nm) 50hz 12.9 25 38.6 51.4 65.4 78.2 100.7 125.4 150 200.4 206.8 250.7 301.1 400.7 461.8
60hz 10.7 20.8 32.1 42.9 54.5 65.2 83.9 104.5 125 167 172.3 208.9 250.9 333.9 384.8
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 140 94 69 58 46 35 29 24 18 14 14 11 9 7
M2(Nm) 50hz 24.6 48.2 72.9 97.5 122.1 145.7 187.5 235.7 282.9 376.1 387.9 439 527 703 764
60hz 20.5 40.2 60.7 81.3 201.8 121.4 156.3 196.4 235.7 313.4 323.2 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4571 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 140 93 70 55 47 34 27 24 17 14 13 12 8 7
M2(Nm) 50hz 48.2 97.5 145.7 193.9 242.1 272 351 439 527 703 724 878 1060 1230 1230
60hz 40.2 81.3 121.4 161.6 201.8 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio 5 10 15 20 25 30 40 50 60 80 100        
2.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 95 68 54 45 36 28 24 18 14        
M2(Nm) 50hz 67 133 200 266 332 399 515 644 773 1571 1230        
60hz 56 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4571 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

Outline and mounting dimension:

G3FM: THREE PHASE GEAR MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
standard brake
0.1kw  Ø18 5–30-40-50 236 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 157 80 81
 Ø22 -160-200 262 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
0.2kw  Ø18 5- 267 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 161 80 81
 Ø22 -80-100 293 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
 Ø28 306 309.5 208.5 11 23.5 215 4 15 45 170 50 28 31 129 8 198.5 105.5 88
0.4kw  Ø22 5- 314 324.5 204 11 19 185 4 12 40 148 47 22 24.5 139 6 171.5 89.5 88.5
 Ø28 -80-100 330 337.5 215 11 23.5 215 4 15 45 170 50 28 31 139 8 198.5 105.5 93
 Ø32 349 357 229.5 13 28.5 250 4 15 55 180 60 32 35 139 10 234 126 98
0.75kw  Ø28 5- 350.5 343.5 227.5 11 23.5 215 4 15 45 170 50 28 31 159 8 198.5 105.5 103
 Ø32 -80-100 379.5 387 242 13 28.5 250 4 15 55 180 60 32 35 159 10 234 126 108
 Ø40 401.5 408.5 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
1.5kw  Ø32 5- 420.5 441 254 13 28.5 250 5 15 55 180 60 32 35 185 10 234 126 121
 Ø40 -80-100 457.5 478 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 485.5 506 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5
2.2kw  Ø40 5- 466.5 487 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 -80-100 510.5 531 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5


 

G3LM: THREE PHASE GEAR MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
standard brake
0.1kw  Ø18 5–30-40-50 236 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 -160-200 262 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
0.2kw  Ø18 5- 267 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 -80-100 293 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
 Ø28 306 309.5 90 140 175 23.5 125 11 65 45 28 31 129 203 8 170 110 15
0.4kw  Ø22 5- 314 324.5 65 130 155 19 90 11 55 40 22 24.5 139 199.5 6 141.5 90 12
 Ø28 -80-100 330 337.5 90 140 175 23.5 125 11 65 45 28 31 139 210 8 170 110 15
 Ø32 349 357 130 170 208 28.5 170 13 70 55 32 35 139 226 10 198 130 18
0.75kw  Ø28 5- 350.5 343.5 90 140 175 23.5 125 11 65 45 28 31 159 222 8 170 110 15
 Ø32 -80-100 379.5 387 130 170 208 28.5 170 13 70 55 32 35 159 238.5 10 198 130 18
 Ø40 401.5 408.5 150 210 254 34 196 15 90 65 40 43 185 249 12 230 150 20
1.5kw  Ø32 5- 420.5 441 130 170 208 28.5 170 13 70 55 32 35 185 250.5 10 198 130 18
 Ø40 -80-100 457.5 478 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 485.5 506 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25
2.2kw  Ø40 5- 466.5 487 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 -80-100 510.5 531 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25


 

G3FS: IEC GEAR REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Power kw output shaft ratio A B C F I J L M N O O1 P Q R S S1 T T1 W W1 X Y Y1
0.12kw  Ø18 5–30-40-50 147 95 115 154 11 16.5 4.5 170 140 4 10 30 145 35 18 11 20.5 12.8 6 4 163 80 86.5
 Ø22 -160-200 173 95 115 164 11 19 4.5 185 140 4 12 40 148 47 22 11 24.5 12.8 6 4 171.5 89.5 89
0.18kw  Ø18 5- 147 95 115 154 11 16.5 4.5 170 140 4 10 30 145 35 18 11 20.5 12.8 6 4 163 80 86.5
 Ø22 -80-100 173 95 115 164 11 19 4.5 185 140 4 12 40 148 47 22 11 24.5 12.8 6 4 171.5 89.5 89
 Ø28 186.5 95 115 186 11 23.5 4.5 215 140 4 15 45 170 50 28 11 31 12.8 8 4 198.5 105.5 93.5
0.37kw  Ø22 5- 181.5 110 130 164 11 19 4.5 185 160 4 12 40 148 47 22 14 24.5 16.3 6 5 201 89.5 99
 Ø28 -80-100 198 110 130 186 11 23.5 4.5 215 160 4 15 45 170 50 28 14 31 16.3 8 5 198.5 105.5 103.5
 Ø32 216.5 110 130 215 13 28.5 4.5 250 160 4 15 55 180 60 32 14 35 16.3 10 5 234 126 108.5
0.75kw  Ø28 5- 206.5 130 165 185 11 23.5 4.5 215 200 4 15 45 170 50 28 19 31 21.8 8 6 216.5 105.5 123.5
 Ø32 -80-100 235 130 165 215 13 28.5 4.5 250 200 4 15 55 180 60 32 19 35 21.8 10 6 236.5 126 128.5
 Ø40 260.5 130 165 270 18 34 4.5 310 200 5 18 65 230 71 40 19 43 21.8 12 8 284 149 134
1.5kw  Ø32 5- 252 130 165 215 13 28.5 4.5 250 200 5 15 55 180 60 32 24 35 27.3 10 8 236.5 126 128.5
 Ø40 -80-100 293.5 130 165 270 18 34 4.5 310 200 5 18 65 230 71 40 24 43 27.3 12 8 284 149 134
 Ø50 321.5 130 165 300 22 40 4.5 360 200 5 25 75 270 83 50 24 53.5 27.3 14 8 323.5 173.5 140
2.2kw  Ø40 5- 290 180 215 270 18 34 5.5 310 250 5 18 65 230 71 40 28 43 31.3 12 8 284 149 134
 Ø50 -80-100 334 180 215 300 22 40 5.5 360 250 5 25 75 270 83 50 28 53.5 31.3 14 8 323.5 173.5 140


 

G3LS: IEC GEAR REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)  
Power kw output shaft ratio A B C D E F G H J K L N P S S1 T T1 W W1 X Y Y1 Z
0.12kw  Ø18 5–30-40-50 147 95 115 40 110 135 65 9 16.5 45 4.5 140 30 18 11 20.5 12.8 6 4 138.5 85 10 M8
 Ø22 -160-200 173 95 115 65 130 154 90 11 19 55 4.5 140 40 22 11 24.5 12.8 6 4 141 90 12 M8
0.18kw  Ø18 5- 147 95 115 40 110 135 65 9 16.5 45 4.5 140 30 18 11 20.5 12.8 6 4 138.5 85 10 M8
 Ø22 -80-100 173 95 115 65 130 154 90 11 19 55 4.5 140 40 22 11 24.5 12.8 6 4 141 90 12 M8
 Ø28 186.5 95 115 90 140 175 125 11 23.5 65 4.5 140 45 28 11 31 12.8 8 4 170 110 15 M8
0.37kw  Ø22 5- 181.5 110 130 65 130 154 90 11 19 55 4.5 160 40 22 14 24.5 16.3 6 5 151 90 12 M8
 Ø28 -80-100 198 110 130 90 140 175 125 11 23.5 65 4.5 160 45 28 14 31 16.3 8 5 170 110 15 M8
 Ø32 216.5 110 130 130 170 208 170 13 28.5 70 4.5 160 55 32 14 35 16.3 10 5 198 130 18 M8
0.75kw  Ø28 5- 206.5 130 165 90 140 175 125 11 23.5 65 4.5 200 45 28 19 31 21.8 8 6 186.5 110 15 M10
 Ø32 -80-100 235 130 165 130 170 208 170 13 28.5 70 4.5 200 55 32 19 35 21.8 10 6 201.5 130 18 M10
 Ø40 260.5 130 165 150 210 254 196 15 34 90 4.5 200 65 40 19 43 21.8 12 8 230 150 20 M10
1.5kw  Ø32 5- 252 130 165 130 170 208 170 13 28.5 70 4.5 200 55 32 24 35 27.3 10 8 201.5 130 18 M10
 Ø40 -80-100 293.5 130 165 150 210 254 196 15 34 90 4.5 200 65 40 24 43 27.3 12 8 230 150 20 M10
 Ø50 321.5 130 165 160 230 290 210 18 40 100 4.5 200 75 50 24 53.5 27.3 14 8 265 170 25 M10
2.2kw  Ø40 5- 290 180 215 150 210 254 196 15 34 90 5.5 250 65 40 28 43 31.3 12 8 230 150 20 M12
 Ø50 -80-100 334 180 215 160 230 290 210 18 40 100 5.5 250 75 50 28 53.5 31.3 14 8 265 170 25 M12

Company Profile

We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.Our leading products is  full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.With fast delivery, superior after-sales service, advanced producing facility, our products sell well  both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and the Middle East and so on.Our aim is to develop and innovate on the basis of high quality, and create a good reputation for reducers.

Workshop:

 

Exhibition

ZheJiang PTC Fair:

Packaging & Shipping

After Sales Service

1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other ServiceIncluding modeling selection guide, installation guide, and problem resolution guide, etc

FAQ

1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:4000-5000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.

Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!

Application: Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical or Horizontal Type
Step: Two Stage- Three Stage
Samples:
US$ 35/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

helical gearbox

How to Choose a Helical Gearbox

Choosing the best helical gearbox is dependent on the type of application you want to use the gear for. You will need to consider the contact ratios and the total of profile shifts required.

Spur gears are more efficient than helical gears

Compared to helical gears, spur gears have straight teeth that are parallel to the axis of the gear. Because they are more efficient, spur gears are often used in low speed applications. However, helical gears are better for low-noise and high-speed applications. Despite their advantages, spur gears are also used in some devices.
Spur gears are not as resilient as other gears. They are less efficient at transmitting power over long distances, and they generate too much noise at high speeds. They also impose a radial load on bearings. They also produce significant vibration that can limit the maximum speed of operation.
Helical gears are better at transferring loads. They are used in a number of applications, including car transmissions, elevators, and conveyors. Helical gears also generate large amounts of thrust. They are also quieter than spur gears.
Unlike spur gears, helical gears use bearings to support their thrust load. They also have more teeth, so they can handle more load than spur gears. They can also be used in non-parallel shafts.
Helical gears are generally used in high-speed mechanical systems. They also have less wear on individual teeth and are quieter running than spur gears.
Helical gears are a refinement of spur gears. They are also used in the printing industry, elevators, and gearboxes for automobiles. They are often used in conjunction with a worm gear to distribute load. They have a higher speed capacity, but they are not as efficient as spur gears. They are used in some high-speed mechanical systems because they generate less noise and vibration.
Spur gears are commonly used in low-speed applications, like rack and pinion setups. Their design makes them more efficient at transmitting power, but they are less resilient than helical gears.
Design space is limited based on a required center distance, target gear ratio, and sum of profile shifts
Using statistically derived parameters, the authors performed a multi-objective optimization of the profile shift of two external cylindrical gears. The main objective of this study was to maximize efficiency and minimize the amount of power lost in the optimized space.
To do this, the authors used a multi-objective optimization algorithm that included all aspects of the optimal profile shift. The algorithm evaluates objective function over a series of generations to determine the best solution.
The multi-objective optimization algorithm was based on a verified optimization algorithm. This algorithm combines analytical pressure loads estimation with an effective method for calculating the deformations of the gear case. Using the aforementioned formulae, the authors were able to identify a feasible solution. The numerical calculations also showed that the corresponding specific sliding coefficients were perfectly balanced.
To identify the most efficient method for determining the profile shift, the authors selected the most efficient method based on the objectives of efficiency and mass. The efficiency objective was considered to be the largest given the small size of the resulting optimization space. This objective is useful in reducing wear failures.
helical gearbox
The largest thermal treatment of a cylindrical gear is case hardening. The ISO/TR 4467:1982 standard provides a practical guide for gears. The largest radii of the pinion and wheel are rb1 and rb2. The ratio of tooth width to base circle diameter of the pinion is normally set to less than 1.
Sliding velocity increases as the distance from the pitch point increases in the line of action
Deflections of the involute profile of a helical gear occur due to the load on the teeth. However, the optimum pressure angle for the gear is not known.
The correct pressure angle for a helical gear cannot be calculated without a surface model. Assuming the pressure is uniform over the profile, a pressure angle of 20deg would be a good bet. However, this would require a mathematical model that can be derived from the Archard wear equation.
In general, the pressure angle will be influenced by the diameter, as well as the gear mesh geometry. It is important to know the actual angle of a helical gear since this will affect the curvature of the profile, the normal force, and the radial force.
The best way to measure the pressure angle is to consider the theoretical pitch diameter. If the pitch diameter is small, then the actual angle will be smaller. This will cause a gap between the flanks. However, it can also cause the gear to deform, leading to unexpected working behavior.
One interesting tangent is the pitch plane, an imaginary plane tangent to the pitch surfaces. The pitch plane is the plane perpendicular to the axial plane of the gear cross section. It is usually used as a reference point to calculate the transverse pressure angle.
The working pressure angle is the angle of the pressure line of the gear mesh. This angle is the same as the reference pressure angle, but the length of the contact line is reduced.
The best way to calculate the working pressure angle is to use the pressure line of the gear mesh. This will give a more accurate value. The actual angle of the pressure line is also related to the transmission ratio. This ratio is usually given as the nominal ratio of angular velocities. The actual velocities will fluctuate about this ratio.

Undercut of a helical gear tooth root

Having an undercut at the pinion root can affect the distribution of load along the line of contact of helical gears. This can result in higher than nominal loads on some teeth and amplitude modulated noise.
The tooth root is affected by a number of factors, including the shape of the tooth cutting tool. The cutting tool must be designed to avoid an undercut without reducing the number of teeth. This is achieved by a process called profile shifting.
Profile shift occurs when the cutting tool changes depth, thereby preventing an undercut. It is often used in the manufacturing process to achieve a greater overlap ratio. The higher the overlap ratio, the less variation there is between the contact lines. This reduces the dynamic tooth loads and reduces noise.
The profile shift is most often associated with the cutting tool tip. This is the point where the involute profile exits the gear, before the tip begins to taper. The involute profile can be defined for every transverse section of the gear face width. The boundary point is a point of tangency between the involute and root profiles.
The involute of a circle is a common way to define a gear-tooth profile. The involute is the path traced by the point on the line when rolling on a circle. It is a useful feature for cylindrical involute gears.
The helix angle is also important to the helical gear. It allows for greater contact capacity and increases the bending capacity of the gear. It must be included in specifications for helical teeth. The angle must be measurable and include the (+-) sign.
The bending strength of a tooth depends on the shape of the root. A large undercut reduces the strength of the tooth.helical gearbox

Contact ratios

Whether a helical gearbox is dynamic or steady-state, the contact ratio is a key factor. The total contact ratio defines the average number of teeth in contact in the plane of action. It is calculated by multiplying the transverse contact ratio with the overlap ratio. The overlap ratio is always non-zero.
The total contact ratio must be 1.0 or greater for a constant speed rotation on the driven side. Gears with a low total contact ratio are known to slow down rotation of the driven gear. The total contact ratio is influenced by the length of the contact line. A high contact ratio is a good choice for dynamic loading.
A low contact ratio results in a greater amount of profile shift and a larger amount of noise. If the contact ratio is too high, it may cause excessive EAP sliding velocity and cause scuffing. In addition, an uneven load share results in amplitude modulated vibrations.
A helical gear is a pair of slim spur gears. The gears are layered in a plane that runs parallel to the face width of the gear teeth. Each gear tooth makes contact with the flank of the next gear tooth. The helical gear tooth flank is a 3-dimensional surface that is a tangent to the base circles of the gears.
The tooth shape of the helical gear tooth is also a key factor in the contact ratio. The tooth form is designed to be in relation to the work piece, tooling, dedendum coefficients, tooth forces, and tooth bending stiffness. A gear tooth form must also relate to tooth surface kinematics and microgeometry modifications.
The active profile is a region of the involute profile between the start and end points. A tooth profile that satisfies the basic law of gear-tooth action is often called a conjugate profile.
China Good quality Three Phase Gear Reduction Motor Helical Gearbox with Output Shaft Material 20crmnti   double stage helical gearboxChina Good quality Three Phase Gear Reduction Motor Helical Gearbox with Output Shaft Material 20crmnti   double stage helical gearbox
editor by CX 2023-10-21

China TA Shaft Mounted Gearbox Gear Reducer with Electric Motor Parallel Reducer Concrete Mixer speed reduce with Best Sales

Applicable Industries: Creating Content Stores, Manufacturing Plant, Equipment Fix Shops, Food & Beverage Manufacturing unit, Building works , Vitality & Mining
Gearing Arrangement: Helical
Output Torque: up to 17000KN.m
Input Speed: up to 2000rpm
Output Speed: up to 400rpm
Item name: shaft mounted reducer
Color: Grey RAL7031/7040,blue RAL5571
Guarantee: 1 Year
Software: Foodstuff ,Plastic, Convery, Equipment, Feed, Mining and so on
Certificate: ISO9001 , CE
Mounting Position: Horizontal (Foot Mounted, Shaft Mounted)
Packing: Picket Box
Ratio: 5.36~197.37
Bearing: C&U, Personalized large precision mental carbon metal equipment for CNC turning equipment NAK, NSK,SKF
OEM service: OEM services
Packaging Specifics: Plywood case
Port: HangZhou,ZheJiang

The RXG Series has extended has long been recognized as a very best vendor for quarry and mine apps where absolute reliability and low routine maintenance are essential factors. One more profitable element is the backstop option that stops back again driving in the situation of inclined conveyors. This gearbox can be concluded by selecting from a broad range of electric powered motors fully manufactured by REDSUN.

Redsun Rxg Series Shaft Mounted Hanging Gear Speed Reducer
VarietyRatioDesignCommon bore (mm)Rated electrical power(KW)Rated torque(N.m)
RXG collection 571012.515202531RXG30303180
RXG35355.5420
RXG40forty forty five15950
RXG45forty five 50 5522.five1400
RXG50fifty Automation Machine Electrical Equipment Complete Turning flywheel ring equipment pinnuyam inside ring gear 32holes 55 sixty372300
RXG6060 65 70fifty five3600
RXG7070 eighty fiveseventy eight5100
RXG8080 one hundredone hundred ten7000
Q: Are you trading business or producer ?A: We are manufacturing facility.
Q: How lengthy is your supply time?A: Normally it is 5-ten times if the products are in stock. or it is fifteen-twenty days if the products are not in stock.
Q: Can we purchase 1 computer of each and every item for good quality testing?A: Yes, we are happy to take trial purchase for top quality testing.
Q: What is your phrases of payment ?A: Payment=1000USD, thirty% T/T in progress, stability prior to shippment.If you have other question, freely to speak to us, Substantial Promoting Industrial Use Minimal Upkeep Planetary Helical Gearbox At Best Cost From India you should.

Choosing a Gearbox For Your Application

The gearbox is an essential part of bicycles. It is used for several purposes, including speed and force. A gearbox is used to achieve one or both of these goals, but there is always a trade-off. Increasing speed increases wheel speed and forces on the wheels. Similarly, increasing pedal force increases the force on the wheels. This makes it easier for cyclists to accelerate their bicycles. However, this compromise makes the gearbox less efficient than an ideal one.
gearbox

Dimensions

Gearboxes come in different sizes, so the size of your unit depends on the number of stages. Using a chart to determine how many stages are required will help you determine the dimensions of your unit. The ratios of individual stages are normally greater at the top and get smaller as you get closer to the last reduction. This information is important when choosing the right gearbox for your application. However, the dimensions of your gearbox do not have to be exact. Some manufacturers have guides that outline the required dimensions.
The service factor of a gearbox is a combination of the required reliability, the actual service condition, and the load that the gearbox will endure. It can range from 1.0 to 1.4. If the service factor of a gearbox is 1.0, it means that the unit has just enough capacity to meet your needs, but any extra requirements could cause the unit to fail or overheat. However, service factors of 1.4 are generally sufficient for most industrial applications, since they indicate that a gearbox can withstand 1.4 times its application requirement.
Different sizes also have different shapes. Some types are concentric, while others are parallel or at a right angle. The fourth type of gearbox is called shaft mount and is used when mounting the gearbox by foot is impossible. We will discuss the different mounting positions later. In the meantime, keep these dimensions in mind when choosing a gearbox for your application. If you have space constraints, a concentric gearbox is usually your best option.

Construction

The design and construction of a gearbox entails the integration of various components into a single structure. The components of a gearbox must have sufficient rigidity and adequate vibration damping properties. The design guidelines note the approximate values for the components and recommend the production method. Empirical formulas were used to determine the dimensions of the various components. It was found that these methods can simplify the design process. These methods are also used to calculate the angular and axial displacements of the components of the gearbox.
In this project, we used a 3D modeling software called SOLIDWORKS to create a 3-D model of a gear reducer. We used this software to simulate the structure of the gearbox, and it has powerful design automation tools. Although the gear reducer and housing are separate parts, we model them as a single body. To save time, we also removed the auxiliary elements, such as oil inlets and oil level indicators, from the 3D model.
Our method is based on parameter-optimized deep neural networks (DBNs). This model has both supervised and unsupervised learning capabilities, allowing it to be self-adaptive. This method is superior to traditional methods, which have poor self-adaptive feature extraction and shallow network generalization. Our algorithm is able to recognize faults in different states of the gearbox using its vibration signal. We have tested our model on two gearboxes.
With the help of advanced material science technologies, we can now manufacture the housing for the gearbox using high-quality steel and aluminium alloys. In addition, advanced telematics systems have increased the response time of manufacturers. These technologies are expected to create tremendous opportunities in the coming years and fuel the growth of the gearbox housing market. There are many different ways to construct a gearbox, and these techniques are highly customizable. In this study, we will consider the design and construction of various gearbox types, as well as their components.
gearbox

Working

A gearbox is a mechanical device that transmits power from one gear to another. The different types of gears are called planetary gears and are used in a variety of applications. Depending on the type of gearbox, it may be concentric, parallel, or at a right angle. The fourth type of gearbox is a shaft mount. The shaft mount type is used in applications that cannot be mounted by foot. The various mounting positions will be discussed later.
Many design guidelines recommend a service factor of 1.0, which needs to be adjusted based on actual service conditions. This factor is the combined measure of external load, required reliability, and overall gearbox life. In general, published service factors are the minimum requirements for a particular application, but a higher value is necessary for severe loading. This calculation is also recommended for high-speed gearboxes. However, the service factor should not be a sole determining factor in the selection process.
The second gear of a pair of gears has more teeth than the first gear. It also turns slower, but with greater torque. The second gear always turns in the opposite direction. The animation demonstrates this change in direction. A gearbox can also have more than one pair of gears, and a first gear may be used for the reverse. When a gear is shifted from one position to another, the second gear is engaged and the first gear is engaged again.
Another term used to describe a gearbox is “gear box.” This term is an interchangeable term for different mechanical units containing gears. Gearboxes are commonly used to alter speed and torque in various applications. Hence, understanding the gearbox and its parts is essential to maintaining your car’s performance. If you want to extend the life of your vehicle, be sure to check the gearbox’s efficiency. The better its functioning, the less likely it is to fail.

Advantages

Automatic transmission boxes are almost identical to mechanical transmission boxes, but they also have an electronic component that determines the comfort of the driver. Automatic transmission boxes use special blocks to manage shifts effectively and take into account information from other systems, as well as the driver’s input. This ensures accuracy and positioning. The following are a few gearbox advantages:
A gearbox creates a small amount of drag when pedaling, but this drag is offset by the increased effort to climb. The external derailleur system is more efficient when adjusted for friction, but it does not create as little drag in dry conditions. The internal gearbox allows engineers to tune the shifting system to minimize braking issues, pedal kickback, and chain growth. As a result, an internal gearbox is a great choice for bikes with high-performance components.
Helical gearboxes offer some advantages, including a low noise level and lower vibration. They are also highly durable and reliable. They can be extended in modular fashion, which makes them more expensive. Gearboxes are best for applications involving heavy loads. Alternatively, you can opt for a gearbox with multiple teeth. A helical gearbox is more durable and robust, but it is also more expensive. However, the benefits far outweigh the disadvantages.
A gearbox with a manual transmission is often more energy-efficient than one with an automatic transmission. Moreover, these cars typically have lower fuel consumption and higher emissions than their automatic counterparts. In addition, the driver does not have to worry about the brakes wearing out quickly. Another advantage of a manual transmission is its affordability. A manual transmission is often available at a lower cost than its automatic counterpart, and repairs and interventions are easier and less costly. And if you have a mechanical problem with the gearbox, you can control the fuel consumption of your vehicle with appropriate driving habits.
gearbox

Application

While choosing a gearbox for a specific application, the customer should consider the load on the output shaft. High impact loads will wear out gear teeth and shaft bearings, requiring higher service factors. Other factors to consider are the size and style of the output shaft and the environment. Detailed information on these factors will help the customer choose the best gearbox. Several sizing programs are available to determine the most appropriate gearbox for a specific application.
The sizing of a gearbox depends on its input speed, torque, and the motor shaft diameter. The input speed must not exceed the required gearbox’s rating, as high speeds can cause premature seal wear. A low-backlash gearbox may be sufficient for a particular application. Using an output mechanism of the correct size may help increase the input speed. However, this is not recommended for all applications. To choose the right gearbox, check the manufacturer’s warranty and contact customer service representatives.
Different gearboxes have different strengths and weaknesses. A standard gearbox should be durable and flexible, but it must also be able to transfer torque efficiently. There are various types of gears, including open gearing, helical gears, and spur gears. Some of the types of gears can be used to power large industrial machines. For example, the most popular type of gearbox is the planetary drive gearbox. These are used in material handling equipment, conveyor systems, power plants, plastics, and mining. Gearboxes can be used for high-speed applications, such as conveyors, crushers, and moving monorail systems.
Service factors determine the life of a gearbox. Often, manufacturers recommend a service factor of 1.0. However, the actual value may be higher or lower than that. It is often useful to consider the service factor when choosing a gearbox for a particular application. A service factor of 1.4 means that the gearbox can handle 1.4 times the load required. For example, a 1,000-inch-pound gearbox would need a 1,400-inch-pound gearbox. Service factors can be adjusted to suit different applications and conditions.

China TA Shaft Mounted Gearbox Gear Reducer with Electric Motor Parallel Reducer Concrete Mixer speed reduce     with Best Sales China TA Shaft Mounted Gearbox Gear Reducer with Electric Motor Parallel Reducer Concrete Mixer speed reduce     with Best Sales
editor by czh2023-03-17

China Guomao Shaft Mounted Speed Reducer Helical Gearbox with 380v AC Motor planetary gearbox

Guarantee: 1 year
Relevant Industries: Garment Stores, Producing Plant, Equipment Repair Shops, Meals & Beverage Manufacturing unit, Farms, Restaurant, House Use, ZheJiang HangZhou 4-20Ma Output Ethylene Super Mini Micro Oval Equipment Movement Meter Retail, Meals Store, Printing Shops, Building works , Energy & Mining, Meals & Beverage Shops, Marketing Organization
Custom-made assist: OEM, Adjustable Rope Ratchet Light Hanger Strengthened Steel Inner Gears Ratchets foe Developing Light-weight Fixtures ODM, OBM
Gearing Arrangement: Helical
Output Torque: 85 to 38600 Nm
Input Velocity: 750-3000 rpm
Output Pace: .04-1200 rpm
Motor Power: .twelve-two hundred KW
Product Collection: GRF
Colour: Customerized
Gear Content: 20CrMnTi
Equipment Hardness: HRC58-62
Housing Material: Forged Iron HT200
Mounting Placement: Horizontal or Vertical
Ratio: 1.65-8000
Certification: ISO9001 CCC CE
Sample: obtainable
Certification: CCC
Packaging Details: wooden case
Port: ZheJiang

Items Description 1.Straightforward integration into all your applications2.Complete rated electricity and output speed are available3.Lower sounds operating and extremely successful gearing4.Dust-tight and drinking water-evidence,can be utilized outside without further enclosure5.Whole versatility in installation possibilities,like base,foot,experience and flange solutions6.Optional voltage and frequency to be appropriate with your nearby energy offer GF seriesparallel-shaft helical geared motor GS serieshelical worm geared motor GK serieshelical bevel geared motor Firm Profile XJ Transmission Co.,Ltd. has specialized in solutions for mechanical transmission for 15 a long time. With persistent concentrate on supply of substantial-top quality speed reducers and skilled configuration for customers’ BR551VEX – Gearbox Movable Rotary Cutters Manufactured in Italy distinct demands, we have proven lengthy-time period relationship with several customers in various fields. We sincerely hope you will become 1 of them and operate with us collectively to advance technology and check out the foreseeable future. Our Factory Certifications Spouse FAQ one.Why decide on us?A.*expert complex support *reliably lower value *dependable good quality handletwo.Is OEM or ODM suitable?A.Sure. Detailed blueprint and specifications are necessary for pricing and sampling. three.Do you have a MOQ?A.No.We can set up enterprise romantic relationship step by stage.Little orders are cared for as nicely as massive orders.4.What is the payment time period?A.30% deposit prior to creation and the equilibrium prior to the products sent to departing port. T/T or L/C acceptable.five.How can I make sure that the quality meets my requirements?A.Every single treatment of the generation are under handle of QC staff according to top quality stipulations on contract. You can have your consultant or a 3rd celebration to carry out inspection ahead of delivery.six.What is the warranty interval?A.One particular year after arrival of the products at the location port.

What Is a Gearbox?

There are several factors to consider when choosing a gearbox. Backlash, for example, is a consideration, as it is the angle at which the output shaft can rotate without the input shaft moving. While this isn’t necessary in applications without load reversals, it is important for precision applications involving load reversals. Examples of these applications include automation and robotics. If backlash is a concern, you may want to look at other factors, such as the number of teeth in each gear.
gearbox

Function of a gearbox

A gearbox is a mechanical unit that consists of a chain or set of gears. The gears are mounted on a shaft and are supported by rolling element bearings. These devices alter the speed or torque of the machine they are used in. Gearboxes can be used for a wide variety of applications. Here are some examples of how gearboxes function. Read on to discover more about the gears that make up a gearbox.
Regardless of the type of transmission, most gearboxes are equipped with a secondary gear and a primary one. While the gear ratios are the same for both the primary and secondary transmission, the gearboxes may differ in size and efficiency. High-performance racing cars typically employ a gearbox with two green and one blue gear. Gearboxes are often mounted in the front or rear of the engine.
The primary function of a gearbox is to transfer torque from one shaft to another. The ratio of the driving gear’s teeth to the receiving member determines how much torque is transmitted. A large gear ratio will cause the main shaft to revolve at a slower speed and have a high torque compared to its counter shaft. Conversely, a low gear ratio will allow the vehicle to turn at a lower speed and produce a lower torque.
A conventional gearbox has input and output gears. The countershaft is connected to a universal shaft. The input and output gears are arranged to match the speed and torque of each other. The gear ratio determines how fast a car can go and how much torque it can generate. Most conventional transmissions use four gear ratios, with one reverse gear. Some have two shafts and three inputs. However, if the gear ratios are high, the engine will experience a loss of torque.
In the study of gearbox performance, a large amount of data has been collected. A highly ambitious segmentation process has yielded nearly 20,000 feature vectors. These results are the most detailed and comprehensive of all the available data. This research has a dual curse – the first is the large volume of data collected for the purpose of characterization, while the second is the high dimensionality. The latter is a complication that arises when the experimental gearbox is not designed to perform well.
gearbox

Bzvacklash

The main function of a gearhead is to multiply a moment of force and create a mechanical advantage. However, backlash can cause a variety of issues for the system, including impaired positioning accuracy and lowered overall performance. A zero backlash gearbox can eliminate motion losses caused by backlash and improve overall system performance. Here are some common problems associated with backlash in gearheads and how to fix them. After you understand how to fix gearbox backlash, you’ll be able to design a machine that meets your requirements.
To reduce gearbox backlash, many designers try to decrease the center distance of the gears. This eliminates space for lubrication and promotes excessive tooth mesh, which leads to premature mesh failure. To minimize gearbox backlash, a gear manufacturer may separate the two parts of the gear and adjust the mesh center distance between them. To do this, rotate one gear with respect to the fixed gear, while adjusting the other gear’s effective tooth thickness.
Several manufacturing processes may introduce errors, and reducing tooth thickness will minimize this error. Gears with bevel teeth are a prime example of this. This type of gear features a small number of teeth in comparison to its mating gear. In addition to reducing tooth thickness, bevel gears also reduce backlash. While bevel gears have fewer teeth than their mating gear, all of their backlash allowance is applied to the larger gear.
A gear’s backlash can affect the efficiency of a gearbox. In an ideal gear, the backlash is zero. But if there is too much, backlash can cause damage to the gears and cause it to malfunction. Therefore, the goal of gearbox backlash is to minimize this problem. However, this may require the use of a micrometer. To determine how much gearbox backlash you need, you can use a dial gauge or feeler gauge.
If you’ve been looking for a way to reduce backlash, a gearbox’s backlash may be the answer. However, backlash is not a revolt against the manufacturer. It is an error in motion that occurs naturally in gear systems that change direction. If it is left unaccounted for, it can lead to major gear degradation and even compromise the entire system. In this article, we’ll explain how backlash affects gears and how it affects the performance of a gearbox.

Design

The design of gearboxes consists of a variety of factors, including the type of material used, power requirements, speed and reduction ratio, and the application for which the unit is intended. The process of designing a gearbox usually begins with a description of the machine or gearbox and its intended use. Other key parameters to consider during gearbox design include the size and weight of the gear, its overall gear ratio and number of reductions, as well as the lubrication methods used.
During the design process, the customer and supplier will participate in various design reviews. These include concept or initial design review, manufacturing design validation, critical design review, and final design review. The customer may also initiate the process by initiating a DFMEA. After receiving the initial design approval, the design will go through several iterations before the finalized design is frozen. In some cases, the customer will require a DFMEA of the gearbox.
The speed increaser gearboxes also require special design considerations. These gearboxes typically operate at high speeds, causing problems with gear dynamics. Furthermore, the high speeds of the unit increase frictional and drag forces. A proper design of this component should minimize the effect of these forces. To solve these problems, a gearbox should incorporate a brake system. In some cases, an external force may also increase frictional forces.
Various types of gear arrangements are used in gearboxes. The design of the teeth of the gears plays a significant role in defining the type of gear arrangement in the gearbox. Spur gear is an example of a gear arrangement, which has teeth that run parallel to the axis of rotation. These gears offer high gear ratios and are often used in multiple stages. So, it is possible to create a gearbox that meets the needs of your application.
The design of gearboxes is the most complex process in the engineering process. These complex devices are made of multiple types of gears and are mounted on shafts. They are supported by rolling element bearings and are used for a variety of applications. In general, a gearbox is used to reduce speed and torque and change direction. Gearboxes are commonly used in motor vehicles, but can also be found in pedal bicycles and fixed machines.
gearbox

Manufacturers

There are several major segments in the gearbox market, including industrial, mining, and automotive. Gearbox manufacturers are required to understand the application and user industries to design a gearbox that meets their specific requirements. Basic knowledge of metallurgy is necessary. Multinational companies also provide gearbox solutions for the power generation industry, shipping industry, and automotive industries. To make their products more competitive, they need to focus on product innovation, geographical expansion, and customer retention.
The CZPT Group started as a small company in 1976. Since then, it has become a global reference in mechanical transmissions. Its production range includes gears, reduction gearboxes, and geared motors. The company was the first in Italy to achieve ISO certification, and it continues to grow into one of the world’s leading manufacturers of production gearboxes. As the industry evolves, CZPT focuses on research and development to create better products.
The agriculture industry uses gearboxes to implement a variety of processes. They are used in tractors, pumps, and agricultural machinery. The automotive industry uses gears in automobiles, but they are also found in mining and tea processing machinery. Industrial gearboxes also play an important role in feed and speed drives. The gearbox industry has a diverse portfolio of manufacturers and suppliers. Here are some examples of gearboxes:
Gearboxes are complex pieces of equipment. They must be used properly to optimize efficiency and extend their lifespan. Manufacturers employ advanced technology and strict quality control processes to ensure their products meet the highest standards. In addition to manufacturing precision and reliability, gearbox manufacturers ensure that their products are safe for use in the production of industrial machinery. They are also used in office machines and medical equipment. However, the automotive gearbox market is becoming increasingly competitive.

China Guomao Shaft Mounted Speed Reducer Helical Gearbox with 380v AC Motor     planetary gearbox	China Guomao Shaft Mounted Speed Reducer Helical Gearbox with 380v AC Motor     planetary gearbox
editor by czh2023-02-19

China Speed Gear Motor Reduction Variator Spiral Bevel Helical Shaft Mounted Cycloidal Transmission Marine Servo Planetary Winch Wheel Drive Nmrv Worm Reducer Gearbox helical angle gearbox

Merchandise Description

Velocity Equipment Motor Reduction Variator Spiral Bevel Helical Shaft Mounted Cycloidal Transmission Maritime Servo Planetary Winch Wheel Travel Nmrv Worm Reducer Gearbox

 

Organization Profile

We are a skilled organization engaged in the R&D, design and style, and production of gearboxes. The business has introduced a variety of advanced production and testing gear. We have productively designed 800Nm-11200Nm planetary gearboxes for development machinery, specific planetary gearboxes for mixers, unique planetary gearboxes for properties, specific reducers for mines, wind electrical power reducers, hydraulic rotary, winch collection, gearboxes for rolling mills, and other series of gearboxes with hundreds of thousands of technical specs. The goods have been extensively utilized in creating components, metallurgy, engineering machinery, hoisting, delivery, chemical, pharmaceutical, electrical energy, and other supporting units and engineering initiatives.
Since its institution, the organization has been accelerating the speed of scientific and technological innovation and unbiased model construction to construct its main competitiveness with new thinking and new producing recognition.

Our Equipments

Certification

Packaging and Shipment 

Solution Description

Agricultural gearbox:
Flail mower gearbox, rotary tiller gearbox, lawn mower gearbox, rotary cutter gearbox, agricultural sprayer gearbox, put up hole digger gearbox, feed mixer gearbox, rotary mower gearbox, gearbox for round saws, irrigation reels gearbox, agricultural generator gearbox, fertilizer spreader gearbox, hydraulic push gearbox, manure spreader gearbox, rotary rakes gearbox, hay tedders gearbox, micro tiller gearbox, cutter bars gearbox, fertilizer mixer gearbox, agitators gearbox for sewage, spherical baler gearbox, snowblower gearbox

Planetary gearbox:

–Gear speed reducer for tracked motor vehicle
–Equipment velocity reducer for winch
–Planetary equipment reducer for wheeled motor vehicle
–Planetary slewing generate
–Planetary gear reducer for wind turbines
–Inline planetary gear reducer
–Proper angle gear push
–Planetary gearbox feed mixer drive

Industrial gearbox
Worm gearbox: RV collection, WP sequence, SWL sequence screw jack, VF series 

Helical gearbox: R/F/K/S collection, HB collection, BKM series, RC collection, SMR shaft mounted gearbox, TA shaft mounted gearbox

Cycloidal gearboxes: BL/XL flange vertical set up double shaft sort, BW/XW baseboard horizontal mounted double shaft sort, BLD/XLD flange vertical put in motor immediate-link kind, BWD/XWD baseboard horizontal installed motor immediate-connection type
Large precision planetary gearbox

 

 

Software

 

Agriculture & Forestry Business & Mining Meals Processing
  • Sprayer
  • Wheel Harvester
  • Crawler Harvester
  • Feed Mixer
  • Forestry Machinery

 

  • Earthwork
  • Development
  • Concrete
  • Road Building
  • Crushing, Grinding, & Raw Content Processing
  • Mud Remedy
  • Grain, processing & milling
  • Baking processing
  • Fruit, vegetable & beverage processing

 

Transport Maritime Affairs Wind Strength
  • Street autos
  • Warehouse and raw content managing
  • Off-highway autos
  • Accessibility and aerial system
  • Warehouse and raw substance managing
  • Automated storage
  • Airport products
  • Logistics and industrial cranes
  • Cellular crane
  • Dredging vessel
  • Offshore construction vessel
  • Operate vessels and tugs
  • Offshore system
  • Service provider ship
  • Pipe laying device and cable laying equipment

 

 

 

  • Wind turbine
  • yaw
  • pitch

 

 

The set up and dimensions of the planetary gearbox are designed in rigorous accordance with the specifications of Italian and American makers so that they can be interchanged with the adhering to series of planetary gearboxes. Functionality and relationship proportions. They are excellent substitutes for these makes.

trasmital bonfiglioli, revini riduttori, rexroth, reggiana riduttori, rossi, zollern 

 

 

Associated Products–Transmission areas

Push shafts

 

 

For much more reducers and mechanical components, make sure you click listed here to check out

 

 

 

US $10-800
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Speed Changing, Speed Reduction
Layout: Planetary
Hardness: Hardened Tooth Surface
Installation: Planetary Reducer
Step: Planetary Drive

###

Agriculture & Forestry Industry & Mining Food Processing
  • Sprayer
  • Wheel Harvester
  • Crawler Harvester
  • Feed Mixer
  • Forestry Machinery

 

  • Earthwork
  • Construction
  • Concrete
  • Road Construction
  • Crushing, Grinding, & Raw Material Processing
  • Mud Treatment
  • Grain, processing & milling
  • Baking processing
  • Fruit, vegetable & beverage processing

 

Transport Maritime Affairs Wind Energy
  • Road vehicles
  • Warehouse and raw material handling
  • Off-highway vehicles
  • Access and aerial platform
  • Warehouse and raw material handling
  • Automatic storage
  • Airport equipment
  • Logistics and industrial cranes
  • Mobile crane
  • Dredging vessel
  • Offshore construction vessel
  • Work vessels and tugs
  • Offshore platform
  • Merchant ship
  • Pipe laying machine and cable laying machine

 

 

 

  • Wind turbine
  • yaw
  • pitch

 

US $10-800
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Speed Changing, Speed Reduction
Layout: Planetary
Hardness: Hardened Tooth Surface
Installation: Planetary Reducer
Step: Planetary Drive

###

Agriculture & Forestry Industry & Mining Food Processing
  • Sprayer
  • Wheel Harvester
  • Crawler Harvester
  • Feed Mixer
  • Forestry Machinery

 

  • Earthwork
  • Construction
  • Concrete
  • Road Construction
  • Crushing, Grinding, & Raw Material Processing
  • Mud Treatment
  • Grain, processing & milling
  • Baking processing
  • Fruit, vegetable & beverage processing

 

Transport Maritime Affairs Wind Energy
  • Road vehicles
  • Warehouse and raw material handling
  • Off-highway vehicles
  • Access and aerial platform
  • Warehouse and raw material handling
  • Automatic storage
  • Airport equipment
  • Logistics and industrial cranes
  • Mobile crane
  • Dredging vessel
  • Offshore construction vessel
  • Work vessels and tugs
  • Offshore platform
  • Merchant ship
  • Pipe laying machine and cable laying machine

 

 

 

  • Wind turbine
  • yaw
  • pitch

 

What Is a Helical Gearbox?

Basically, a gearbox is a rotating circular machine part that consists of toothed components, which mesh together. Its function is to transfer speed and torque to other parts of the machine. It is also similar to a lever, and operates on the same principle.helical gearbox

Double helical gears

Having a helical gearbox has many advantages, including higher efficiency, high strength, and a superior gear system. However, it has its drawbacks. One of these drawbacks is the axial thrust. Axial thrust is not a problem with single helical gears, but it is a problem with double helical gears.
In double helical gears, there are two sets of teeth that are arranged in a V-shape. In one set of teeth, there is a groove that enables the axial force to be cancelled out. The groove eliminates the need for thrust bearings and allows for efficient handling of high capacity power transmission.
Aside from the axial thrust, there are also issues with face contact. Asymmetric load sharing and oscillation put substantial alternating loads on the shaft bearings. These alternating loads can lead to early bearing failure.
Fortunately, helical gears are smoother than spur gears, which means they can withstand more load. They also have greater pitch circle diameter than spur gears. However, they are limited in their scope. The pitch error distribution on the helical gears is typically limited to 50 mm peak-to-peak amplitude. It is important to control the phase difference of oncoming gears with high accuracy.
Typically, the helical gears that are used in a gear box are assembled from the same module. This allows for interchangeability of components and economical construction. A normal module set can use the same tooth-cutting tools that are used for spur gears.
Double helical gears are used in power transmission in fluid pumps and gas turbines. They are also commonly used in planetary reduction gear boxes for engines in civil aviation.
Generally, double helical gears are larger than single helical gears. They are typically generated from a special generator. They are also more expensive.
However, manufacturers are looking to find gears that are more convenient to use. One solution is to manufacture double helical gears on a multi-tasking machine tool. This allows the gear to be machined in complicated shapes.
The multi-tasking machine tool can also modify the tooth surface. This is useful for 3D printing helical gears with a high level of accuracy.helical gearbox

Crossed-axis helical gears

Several factors affect the performance of crossed-axis helical gears. One of the important factors is the position of the gears on the cross shaft. The gears will not perform properly if they are not oriented in a different direction.
Crossed-axis helical gears have a special situation, in which they will not function properly if the gears are oriented in the same direction. This is especially true for automobile oil pump/distribution shafts. Depending on the situation, gears will operate as a normal helical gear or as a spur gear.
Compared to spur gears, crossed-axis helical gears have relatively higher capacity. However, the transverse contact ratio of these gears is reduced. This decrease is dependent on the pressure angle. The pressure angle affects the curvature radii of the teeth. In addition, the length of the contact line is reduced. This shortens the efficiency of the gear.
Helix angle of crossed-axis helical gears is 45 degrees. It may be a left-handed or a right-handed gear. The pitch circle diameter of a helical gear may be big compared to that of a spur gear. This is due to the fact that the gears are cut at an angle to the shaft.
In the axial direction, the meshing of helical gears is very similar to spur gears. However, there are a few design rules to optimize these gears.
The first rule is that the gears must be staggered in opposite directions. If the gears are not staggered, the contact lines cannot be changed.
The second rule states that the pitch of a helical gear is dependent on its helix angle. It is possible to calculate the pitch circle of a helical gear, by integrating along the face width. In addition, the length of the contact lines decreases as the pressure angle increases. However, this decrease is not as large as that of a spur gear.

Right angle helical gears

Choosing a right angle helical gearbox can be difficult. With so many types, sizes, and configurations to choose from, it can be difficult to figure out which one is right for your application. The key to choosing the right gearbox is understanding your application and what factors are most important to you.
For example, if you are looking for a gearbox that can be used in a high-speed, high-torque application, the most important consideration is the efficiency of the product. Right-angle gearboxes are compact and easy to maintain, making them ideal for high-torque applications.
Some applications that require high-torque gears include pulp and paper manufacturing, food processing, mining, and car washes. Some of the advantages of right angle gears include high efficiency, low maintenance, and low noise. If you are in the market for a right angle helical gearbox, make sure to select a supplier that can provide you with a wide range of options.
Right-angle helical gearboxes come in several different bevel configurations. Spiral bevel gears require precision and are difficult to manufacture. However, they can be used interchangeably. Spiral miter gears are designed to rotate in the same direction as the input shaft, which helps ensure a smooth, direct transfer of power.
If you are considering a helical gearbox for a high-speed application, you will need to know your preferred input/output ratio. The standard ratios are 1:1 and 2:1. If you need a step-up ratio, you can install an additional output shaft opposite the input shaft.
Other benefits include lower running noise, superior strength, and durability. Because they are made of larger teeth, helical gears are less likely to wear out. Also, helical gears provide higher power carrying capacity.
To determine which type of right angle gearbox is best suited for your application, you should discuss your needs with your supplier. They should be able to offer a wide range of options, including custom solutions. They should also provide you with a list of past clients and online reviews.
To find a right angle helical gearbox that can meet your needs, it’s important to understand the various design features. For example, you should make sure that your gearbox has a self-locking capability, which means that the load cannot drive the worm. Having a self-locking gearbox also means that you do not need to install a braking system.helical gearbox

Spiral teeth

Using helical gearboxes to drive a motor car or truck is an efficient method of power transmission. However, the efficiency of this method depends on the helix angle of the gear. The helix angle is the angle that the gear teeth are cut at.
Helical gearboxes may be of different helix angles, depending on the specific gear set. The helix angle can vary between 15 and 30 degrees. This is important because the helix angle has a significant effect on the position of tooth contact. If the contact is not in a proper position, then there will be a large amount of vibration. This will affect the speed of the gear.
Helical gearboxes can be of two types: crossed axis and parallel axis. Crossed axis gears are usually used to connect parallel shafts. They have the same center gap as spur gears. On the other hand, parallel axis gears are usually used to drive a motor. The difference between the two types of gearboxes is their design and arrangement.
In addition to the helix angle, the gears may have different fillet, teeth, and radius. This means that the gear will have different NVH characteristics. In addition, there are different types of spiral teeth that may be used in the gearbox.
Hypoid gears are also similar to spiral bevel gears, but they differ in that the axes of the gear shaft do not intersect the axis of the hypoid gear. The hypoid gear exerts a very high thrust load on the bearings.
When compared to a straight bevel gear, the hypoid gear experience a smoother, less noisy operation. They also produce less shock loading.
Spiral bevel gears are also designed to produce less vibration. They are also more cost-effective. However, they require a larger diameter to transmit the same torque. This can lead to a reduced mechanical efficiency and lower fuel economy.
The best spiral bevel gears can carry a higher thrust load than straight teeth. This is why they are preferred for applications that require heavy load efficiency.
They are also appreciated for their NVH characteristics. They are also a quieter option for applications that require high speed. Helical gears can be used in many different industries. The food, automotive, and oil industries are examples of these types of gears.
China Speed Gear Motor Reduction Variator Spiral Bevel Helical Shaft Mounted Cycloidal Transmission Marine Servo Planetary Winch Wheel Drive Nmrv Worm Reducer Gearbox     helical angle gearboxChina Speed Gear Motor Reduction Variator Spiral Bevel Helical Shaft Mounted Cycloidal Transmission Marine Servo Planetary Winch Wheel Drive Nmrv Worm Reducer Gearbox     helical angle gearbox
editor by czh 2023-01-07

China Planetary Gear Reducer Low Noise High Efficiency Parallel Shaft Helical Gearbox helical gearbox for motor

Item Description

If you need to have to customize non-regular gearbox,

we can personalized dependent on drawings or samples!

Solution Description

Make Specifics

About Us

Xihu (West Lake) Dis. HangZhou Reducer Co., Ltd. is a national massive-scale enterprise, a national second-amount business, a national innovative business in subject management, and 1 of the five hundred largest equipment sector enterprises in China. Our business has far more than 100 sets of manufacturing equipment for various varieties of reducers, and the products are divided into much more than a dozen groups and hundreds of designs.

Mainly which includes WH sequence arc cylindrical worm reducer, CW sequence arc cylindrical worm reducer, SCW shaft-mounted arc tooth worm equipment reducer, WD WS sequence cylindrical worm reducer, SWL sequence JWM sequence worm equipment elevate, aircraft secondary envelope toroidal worm reducer, TP sequence envelope worm reducer, PW collection envelope reducer, CW series modular reducer, ZQQH ZQSH ZD ZL ZS Z Cylindrical gear reducer, ZDY ZLY Layout and improvement of ZSY tough tooth floor equipment reducer, X/B collection planetary cycloidal needle wheel reducer, 8000 collection planetary cycloidal reducer and other non-standard items.

Our manufacturing unit has a complete high quality, setting, occupational CZPT and basic safety 3 significant administration method collection certification, and has a large number of advanced products and screening devices at home and overseas this sort of as Niles forming and grinding equipment imported from Germany, OKUMA horizontal machining center, gear tests middle and coordinate measuring instrument imported from Japan.

RFQ

Q:What information should I tell you to affirm pace reducer?

A: Product/Dimension, Transmission Ratio, Shaft instructions & Order quantity.

 

Q:What if I don’t know which gear reducer I need?

A:Don’t be concerned, Ship as a lot info as you can, our team will support you uncover the proper 1 you are seeking for.

 

 

Q:What is the MOQ?

A: It is Ok for 1 or small pieces trial purchase for top quality screening.

 

Q:Who I should contact?

A:Remember to contact Hao Zhang if you want much more assist.

 

Q:How prolonged should I wait for the feedback soon after I send the inquiry?

A: Inside twelve hrs

 

Q:What is the payment term?

A:You can pay by way of T/T(30% in progress+70% just before delivery), L/C ,West Union and many others

 

Q:What is the delivery time?

A:Typically is twenty-30days right after get, for unique product or massive quantity you should e-mail to us for checking.

 

Q:What is the guarantee time?

A:12months

US $20-1,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: According to The Demand
Gear Shape: Cylindrical Gear
Step: Three-Step

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $20-1,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: According to The Demand
Gear Shape: Cylindrical Gear
Step: Three-Step

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

Helical Gearbox

Depending on the helical gearbox, it can be either Crossed-axis or Inline. Basically, helical gearboxes are composed of a set of toothed gears that mesh with other toothed parts to transmit torque and speed to other parts of the machine.helical gearbox

Right angle helical gearboxes

Choosing the right angle gearbox can be difficult. This is because the design and specifications will depend on the type of application. The right gearbox can make or break the efficiency of the system. For example, a right angle gearbox will need to be corrosion resistant if it is used in a washdown application. It may also require special grease for use in cold temperatures.
There are many different types of right angle gearboxes. The types include worm, hypoid, and spiral bevel gearboxes. The most common are worm gearboxes. These are a great option for applications that need high torque and power. However, they are not as efficient as spur gears.
Helical gearboxes are ideal for heavy-duty industrial applications such as conveyors, blowers, and elevators. They are quiet and have better speed capabilities than spur gears. They can handle larger loads because of their gradual engagement. They are also capable of adjusting the rotation angle by 90 degrees. They are also more efficient at high speeds.
Spiral bevel gearboxes require more precision to manufacture. They are also more expensive to produce. This is because the teeth need to be drilled and shaped to fit the shafts. The gearbox needs to be designed with tight tolerances and requires basic lubrication. Its operating cycle is long.
Helical gearboxes can be used in conjunction with other gearboxes. For example, the output shaft may be a hollow shaft, or it may be designed with dual counter-rotating shafts. They can also be designed to operate in either a clockwise or counter-clockwise direction.
Right angle gearboxes are ideal for high-speed applications. They require less maintenance than other industrial components. They may require corrosion resistant plating or stainless steel shafts. If you are considering a right angle gearbox, check with a distributor to see what types of products are available. A representative will be able to help you with installation. They may also offer custom gearbox solutions to fit your needs.
A gearbox is made up of four main components. These components include the input shaft, the output shaft, the gear, and the backlash.

Crossed-axis helical gears

Normally, helical gearboxes are used to increase torque between two rotating shafts. Compared to other types of gearboxes, helical gearboxes offer greater speed and power carrying capacity. They are also quieter and smoother in operation. These gearboxes are used in many industries such as food processing, plastic, rubber, and oil industries. These gears also have the advantage of being cheaper than spur gears.
These gears are designed with special teeth that are positioned at an angle to the face of the gear. As they rotate, the teeth engage gradually. They have longer teeth, which allow them to carry heavy loads. The contact area also increases as the gears rotate.
A cross axis helical gearbox is one of the most common types of gearboxes. This gearbox has an advantage over spur gears, since it uses bearings to support the thrust load. It can also adjust the rotation angle by 90 degrees. These gearboxes are typically used to drive automobile oil pump/distribution shafts. They are also used to drive blowers. They have a large thrust force.
The cross axis helical gearbox has the advantage of using bearings to support the thrust load. However, it also has the disadvantage of using a large amount of bearings. In addition, these gears are not suitable for speed reduction beyond 1:2.
Thermoplastic crossed axis helical gears are a convenient solution for high volume applications. These gears are self-locking and offer high torque. These gears are also very durable. They are also available in a variety of configurations and sizes. They are used in a wide range of industries, including the textile industry. The output torque of these gears is also very high.
Crossed helical gears are also used to transmit motion and power between perpendicular but non-intersecting shafts. To achieve this, two mating helical gears must have the same helix angle, pressure angle, and normal pitch. They should also be mounted on perpendicular but non-intersecting, parallel shafts.
To calculate the real radial pitch of a gear, the angle of cut is measured. The gear teeth are then cut at an angle to the face of the gear. The helix angle is also measured.helical gearbox

Inline helical gears

Unlike spur gears, helical gears have a large surface contact and are characterized by low noise and large torque. Moreover, helical gears also have a high degree of meshing performance. They are also compact and durable.
As the name suggests, helical gears are produced using hard steel teeth. They are also hobbed to ensure smooth running and accurate surface finish. In addition, all gearing is ground for increased efficiency.
Inline helical gearboxes are used in a number of applications, including waste water systems and in solvent extraction. They are also used in industries like power plants and food & tobacco. They have good efficiency and are low in cost. They also have interchangeability and high durability. They can be installed in a single piece aluminum alloy housing. They can also be foot mounted or flange mounted. They are available in single stage and three stage constructions.
Helical gearboxes are typically used in high-load applications, such as in cement and waste water systems. They are also suitable for industrial applications, including in manufacturing. They are also used in applications where there is a large speed variation range. They are suitable for a wide temperature range, from -10 degC to 40 degC.
A helical gearbox has a high degree of interchangeability, and can be installed with a wide range of motors. They are also available in flame proof versions. They can also be supplied with an integrated output flange. They have standard IEC inputs, making them easy to install and operate. They also have a removable inspection cover, which allows periodic inspection of gearing. They can also be supplied with integral mounting bases.
The transmission ratio of helical gearboxes is finely graded to meet different working conditions. They also have an output torque that ranges from 1.4-250. They are also available in a modular model, which allows them to be produced in an economical manner. They can also be installed with a standard IEC input, which makes them easy to fit with any IEC motor. They also have a permanent nameplate, which indicates the ratio and the output torque.helical gearbox

Helix angle

Using a helical gearbox is a more economical and efficient way of creating a gearbox. It is also beneficial for production because it allows for more interchangeable components. It can also be used in the oil and plastic industries. It has advantages over conventional gears because it runs quieter.
The helical gearbox is a type of gearbox that uses a helical cut on the teeth of the gears. It carries more surface contact than conventional gears, which increases the power carrying capacity. It is also more durable and quieter than conventional gears.
The helical gearbox is generally used in enclosed gear systems because it allows for higher tooth overlap and smoother performance. It also eliminates thrust forces. The helical gearbox can be made of two helical sections that are close together. It is common to use double helical gearboxes in enclosed gear systems. The gears can be ground and hardened.
The radial pitch of helical gears is about eight millimeters. In the helical gearbox, the radial pitch of the gears is the same as the pitch of the spur gears. Using the same tooth cutting tools, it is possible to make helical gears more economically.
The pitch of the helical gearbox will vary with the helix angle. Typically, the helix angle is between 15 and 30 degrees. The pitch will also change with the number of teeth in the spur gear. The pitch will increase when the number of teeth increases.
The pitch is also affected by the pressure angle of the tooth. The pressure angle affects the normal force and curvature radii. The length of the helical gear contact line decreases as the pressure angle increases. This can also be seen when considering contact on the tooth surface. The helix angle is also important when calculating the forces between the helical gears.
It is important to understand that helical gears generate axial forces within the gear-mesh. These forces need to be supported by bearings. They also generate heat. This heat is also detrimental to the efficiency of the gear. It can also cause power loss.
China Planetary Gear Reducer Low Noise High Efficiency Parallel Shaft Helical Gearbox     helical gearbox for motorChina Planetary Gear Reducer Low Noise High Efficiency Parallel Shaft Helical Gearbox     helical gearbox for motor
editor by czh 2023-01-02

China Long Life F Series Parallel Shaft Helical Reduction Fa97 Gearbox with 10HP Motor Electric Motor Speed Reducer helical bevel gearbox

Product Description

SC Transmission long life F Series parallel shaft helical reduction FA97 gearbox with 10hp motor electric motor speed reducer

 

Model:37~167

Ratio:3.77~281.71

Input power:0.12~250kW

Output torque:3.5~37125N.m

Product overview:

F parallel helical gear reducer is manufactured according to international technical requirements, with high technology content.
saving space, reliable and durable, high overload capacity, power up to 90KW above.
low energy consumption, superior performance, reducer efficiency as high as 95%.
small vibration, low noise, high energy saving, selection of high-quality steel materials, steel cast iron box, gear surface after high-frequency heat treatment.
after precision processing, to ensure the accuracy of shaft parallelism and positioning, which all constitute the gear transmission assembly deceleration motor configuration of all kinds of motors, forming an electromechanical integration, fully ensure the quality characteristics of the product.
 

Size

97

Structure

FA

Input power rating 

1.1-30kw

Ration

4.68-270.64

Maximum torque

4300N.m

Weight

 260kg

 

Product Description

 

Ratio 3.77-276.77
Input power 0.12-200KW
Output torque 3.5-21700N.m
Output speed 5-352rpm
Mounting type Foot mounted, foot mounted with solid shaft, output flange mounted, hollow shaft mounted, B5 flange mounted with hollow shaft, foot mounted with hollow shaft, B14 flange mounted with hollow shaft, foot mounted with splined hole, foot mounted with shrink disk, hollow shaft mounted with anti-torque arm. 
Input Method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor
Brake Release HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position)
Thermistor TF(Thermistor protection PTC thermisto)
TH(Thermistor protection Bimetal swotch)
Mounting Position M1, M2, M3, M4, M5, M6
Type F37-F157
Output shaft dis. 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing material HT200 high-strength cast iron from R37,47,57,67,77,87
Housing material HT250 High strength cast iron from R97 107,137,147,
157,167,187
Heat treatment technology carbonitriding and hardening treatment
Efficiency 92%-94%
Lubricant VG220
Protection Class IP55, F class

Product Parameters

 

 

Company Profile

FAQ

 

Shipping

US $50-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Gear Shape: Helical Gear
Step: Single-Step
Type: Gear Reducer

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size
97
Structure
FA
Input power rating 
1.1-30kw
Ration
4.68-270.64
Maximum torque
4300N.m
Weight
 260kg

###

Ratio 3.77-276.77
Input power 0.12-200KW
Output torque 3.521700N.m
Output speed 5-352rpm
Mounting type Foot mounted, foot mounted with solid shaft, output flange mounted, hollow shaft mounted, B5 flange mounted with hollow shaft, foot mounted with hollow shaft, B14 flange mounted with hollow shaft, foot mounted with splined hole, foot mounted with shrink disk, hollow shaft mounted with anti-torque arm. 
Input Method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor
Brake Release HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position)
Thermistor TF(Thermistor protection PTC thermisto)
TH(Thermistor protection Bimetal swotch)
Mounting Position M1, M2, M3, M4, M5, M6
Type F37-F157
Output shaft dis. 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing material HT200 high-strength cast iron from R37,47,57,67,77,87
Housing material HT250 High strength cast iron from R97 107,137,147,
157,167,187
Heat treatment technology carbonitriding and hardening treatment
Efficiency 92%-94%
Lubricant VG220
Protection Class IP55, F class
US $50-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Gear Shape: Helical Gear
Step: Single-Step
Type: Gear Reducer

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size
97
Structure
FA
Input power rating 
1.1-30kw
Ration
4.68-270.64
Maximum torque
4300N.m
Weight
 260kg

###

Ratio 3.77-276.77
Input power 0.12-200KW
Output torque 3.521700N.m
Output speed 5-352rpm
Mounting type Foot mounted, foot mounted with solid shaft, output flange mounted, hollow shaft mounted, B5 flange mounted with hollow shaft, foot mounted with hollow shaft, B14 flange mounted with hollow shaft, foot mounted with splined hole, foot mounted with shrink disk, hollow shaft mounted with anti-torque arm. 
Input Method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor
Brake Release HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position)
Thermistor TF(Thermistor protection PTC thermisto)
TH(Thermistor protection Bimetal swotch)
Mounting Position M1, M2, M3, M4, M5, M6
Type F37-F157
Output shaft dis. 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing material HT200 high-strength cast iron from R37,47,57,67,77,87
Housing material HT250 High strength cast iron from R97 107,137,147,
157,167,187
Heat treatment technology carbonitriding and hardening treatment
Efficiency 92%-94%
Lubricant VG220
Protection Class IP55, F class

Why Choose a Helical Gearbox?

Choosing a helical gearbox is an important decision for any machine builder. It can help you to reduce maintenance costs, improve productivity and efficiency, and ensure that your equipment operates quietly and efficiently. In addition, it can also be compact in size and easy to install.helical gearbox

High productivity and efficiency

Compared to spur gears, helical gears have high productivity and efficiency. This is due to the fact that the helical gearbox is more effective at transferring power between right-angle configurations. Helical gears are also quieter. They also have the ability to tolerate a greater load. These gears are usually used in high-load applications, such as automotive transmission applications.
The basic features of helical gears include a slanted tooth face, a larger contact ratio, and a smoother performance. Helical gears are also less expensive than spur gears. They have more power carrying capacity, longer life, and are easier to maintain.
There are many factors that affect the efficiency of helical gearboxes. Some of them include the number of stages, reduction ratio, ambient conditions, and lubrication. They are also affected by the number of teeth.
Power loss in helical gears is mainly due to friction and heat. There are various approaches to minimize these losses. One approach is to analyse power losses using a numerical method.
Other factors that affect the efficiency of helical systems include speed, noise, and the number of teeth. The amount of power lost in gear mating is dependent on the load.

Low power consumption

Compared to other types of gearboxes, helical gearboxes have low power consumption. This is because they can tolerate more load, conduct smooth performance, and are quieter. They also require less oil changes and have a longer life span.
Helical gears have special teeth that are cut at an angle. The teeth are designed to engage gradually, rather than quickly. They can transfer power between parallel configurations and right-angle configurations.
Helical gearboxes are the most widely used gearboxes. They are also the most efficient. They can work at 98% efficiency. However, they are more expensive than spur gears. They can be packaged with oil-filled housings. They have less noise and require less maintenance. They can operate cooler, and have more torque capacity.
Helical gearboxes have two types: single and double helical gears. In the single type, the gears are perpendicular to the axis. They are usually used in automotive transmission applications. They can also be used in forward velocities. In the double type, the helical faces are next to each other.
Helical gears work at higher ratios, which increases their efficiency. They are also less noisy than spur gears. They are a good choice for applications that require high torque capacity. The basic efficiency of helical gearboxes ranges from 90% to 99.5%. They are also easier to operate and have a longer life span. They are suited to a wide range of applications.helical gearbox

Compact in size

Having a shiny new set of wheels is a nice change of pace. You get to sit in style and you get to drive it like the pro. The trick is finding the right one at the right time. Fortunately, there are plenty of companies who know how to build a high quality car that can be afforded by the average Joe. You’ll find all types of cars from sports coupes to hatchbacks. You’ll also find all types of drivers from the young professional to the seasoned veteran. You’ll also find all types of roads from main streets to back roads. There are even all types of parking spaces to choose from. With a bit of planning and some research, you’ll find the perfect fit for you and your family. You can’t help but wonder why you didn’t choose a vehicle with this many perks sooner. It’s a nice way to spend a night on the town, without having to worry about a parking fee. The next time you’re in the mood to take the family out to the country for a weekend in the great bluffs, you’ll know which ones to avoid.

Noise-free operation

Compared to spur gears, helical gears have better speed capability and quieter operation. However, helical gearboxes often have problems that stop their service. These faults result in increased productivity costs. These problems include fatigue, chipping tip, crack and missing tooth.
In this paper, we propose a novel signal processing scheme to detect gearbox faults at constant speed. The method involves the use of spectral subtraction (SS) to remove the spectral noise of a signal. This approach is widely used in speech signal processing. It is also used to estimate real-time noise information. The method was successfully applied to the analysis of gearbox faults.
The spectral subtraction technique is applied to the transmission error and to the side-band frequency feature. The side-band frequency is equal to the rotation frequency of the input shaft. A square envelope spectrum method is used to obtain the spectral feature. It was then used to obtain the corresponding fault signal. The method is then compared with experimentally measured noise data.
It is also important to note that the side-band feature is not stable in different noise levels. The optimal demodulation subband selection method is not obvious. However, the proposed method can obtain a stable amplitude value when SNR is low.
Another important factor that reduces noise is the overlap ratio. The overlap ratio is the sum of the transverse contact ratio and the face contact ratio. When the overlap ratio approaches one, the noise is minimized.

Improved performance at high speeds

Whether used in an industrial, automotive or power generation application, helical gearboxes provide a number of benefits over traditional spur gearing systems. These advantages include reduced noise, higher load capacity and smoother operation.
In an effort to reduce noise and improve performance at high speeds, Parker engineers developed a helical gearbox that runs quieter and produces 30-40% more torque than a conventionally modified gear. They also redesigned the entry and exit points of the gear tooth for increased efficiency and strength.
The high-speed helical geartrain has been tested at 5,000 hp power. The tests were performed in the High-Speed Helical Geartrain Test Facility at the NASA Glenn Research Center. The tests were conducted at four different design configurations and at multiple input shaft speeds. These tests included temperature increases from inlet to outlet, fling off temperatures, and power loss of the helical system.
The first step was to improve load distribution of the gear pair. This is done by modifying the microgeometry of each gear. In addition to modifying the microgeometry of each tooth, the length of the contact line was extended. This resulted in a higher tooth contact ratio.
Another option is to modify the straddle-mounted pin of the PGS. This is a complicated task because of spatial constraints. In order to determine whether the pin will have the desired effect, it needs to be tested in real-world tests.helical gearbox

Reduce maintenance costs

Compared to spur gears, helical gears have several advantages, such as less noise and vibration, greater load carrying capacity, and longer life. They also have a reduced maintenance cost.
Helical gears can be divided into two main types: single helical and crossed axis helicals. In the single helical type, two or three teeth connect at all times.
In crossed axis helicals, the shafts are inclined at a variety of angles. These gears are primarily used in non-perpendicular transmissions. They can have very low load carrying capacity, but they offer better strength and speed reduction than spur gears.
The double helical type has two mirrored rows of teeth that are angled. This type of gear is also known as a herringbone gear. It’s a design that’s ideal for non-perpendicular transmissions.
Helical gears are packaged in oil filled housings. They are a space saving gear reducer. They are used in automobile transmissions and other forward speeds. They are also used in industrial gearboxes.
Helical gears can be made of either solid or semi-solid materials. They can be sliced into an arbitrary number of cross sections. This allows the helix to be adjusted to suit the application.
It’s important to choose the right gear for your application. The gear’s design may include the number of teeth, lubricant type, surface treatment, and the tooth angle. It’s also important to choose the right lubricant, because it can affect the noise levels and the efficiency of the gear.
China Long Life F Series Parallel Shaft Helical Reduction Fa97 Gearbox with 10HP Motor Electric Motor Speed Reducer     helical bevel gearboxChina Long Life F Series Parallel Shaft Helical Reduction Fa97 Gearbox with 10HP Motor Electric Motor Speed Reducer     helical bevel gearbox
editor by czh 2022-12-05

China Nmrv Series Worm Gear Reducer Shaft Motor Speed Bevel Helical Gearbox with Best Sales

Product Description

 

Product description

NMRV Series Worm Gear Reducer Shaft Motor Speed Bevel Helical Gearbox

NRV

030

040

050

063

075

090

110

130

150

B

20

23

30

40

50

50

60

80

80

D1

9 j6

11 j6

14 j6

19 j6

24 j6

24 j6

28 j6

30 j6

35 j6

G2

51

80

74

90

105

125

142

162

195

G3

45

53

64

75

90

108

135

155

175

I

30

40

50

63

75

90

110

130

150

b1

3

4

5

6

8

8

8

8

10

f1

M6

M6

M8

M8

M10

M10

M12

t1

10.2

12.5

16

21.5

27

27

31

33

38

NRV-NMRV

030-040

030-050

030-063

040-075

040-090

050-105

050-110

063-130

063-150

B

20

20

20

23

23

30

30

40

40

D1

9 j5

9 j6

9 j6

11 j6

11 j6

14 j6

14 j6

19 j6

19 j6

G2

51

51

51

60

00

74

74

90

90

I

10

20

33

35

50

60

60

67

87

b1

3

3

3

4

4

5

5

6

6

f1

M6

M6

M6

M6

t1

10.2

10.2

10.2

12.5

12.5

16

16

21.5

21.5

NMRV571

Weight without motor:0.7kg

Input size: ( Pm, Dm, bm, tm )

NMRV030

Weight without motor:1.2kg

Input size: ( Pm, Dm, bm, tm )

NMRV040 Output

D H8

b

t

18

(19)

6

(6)

20.8

(21.8)

(..)Only on request

Weight without motor:2.3kg

Input size (Pm, Dm, bm, tm)

 

NMRV110

Weight without motor: 35kg
Input size: (Pm, Dm, bm, tm)

NMRV130

Weight without motor: 48kg
Input size: (Pm, Dm, bm, tm)

 

NMRV150

Weight without motor: 87.8kg
Input size: (Pm, Dm, bm, tm)

Features:

1) Aluminum alloy die-casted gearbox
2) Compact structure saves mounting space
3) Highly accurate
4) Runs forward and backward
5) High overload capacity
6) Stable transmission with reduced vibration and noise

Characteristics:

1. High quality aluminum alloy quadrate case .
2. High efficiency.
3. Small size, compact constructure and light weight.
4. Combination of 2 single-step worm gear speed reducers, meeting the requirements of super speed ratio.

Technical Data:

1. Input power: 0.06kW-15kW
2. Output torque: 7.8-1195N.m
3. Speed ratio: (5-100) 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100
4. Adapt for IEC, NEMA, SERVO
Materials:
1. From RV25 up to RV105: Aluminium alloy housing.
2. From RV110 to RV150: Cast iron housing.
3. Seal: CZPT Seal from ZheJiang
4. Bearing :homemade Bearing
Color:
1. RAL5571
2. Blue
3. Silver
Quality control:
1.Quality guarantee: 1 year
2.Certificate of quality: ISO9001:2008
3.Every product must be tested before packing

 

General Technical data:

Size number:25,30,40,50,63,75,90,110,130,150

Ratio:1/100-1/5000

Color:blue,silver,RAL5571 color
Material:housing -casting iron- HT200-250#/aluminum worm gear-KK alloy worm-20CrMnTi with carburizing and quenching,surface hardness is 58-62HRC shaft-chromium steel-45#
Packing: Inner pack: use plastic bag a Inner pack: use plastic bag and foam box, outer pack: carton or wooden case 1set/bag/carton or based on customer’s requestbearing: CZPT & Homemade bearing
Seal: CZPT seal from ZheJiang
Input power: 0.25kw,0.37kw,0.55kw,0.75kw,1.1kw,1.5kw,2.2kw,3.0kw,4.0kw,5.5kw,7.5kw
Lubricant:Synthetic & Mineral
IEC flange:56B5,63B5,71B5,80B5,90B5,100B5,112B5,132B5
Output form: solid shaft,hollow shaft weight: 0.7-87.8KGSapplication: In industrial machine:food Stuff,ceramics,chemical,packing,printing,dyeing,woodworking,glass and plastics
Warranty:1 year
Recommend product

NMRV Series Transmission Gearboxes

 

Gear Reducers For Belt Conveyor

Speed Worm Gear Reducer

HangZhou CZPT Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.

Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.

 

US $10-100
/ Piece
|
100 Pieces

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

Output Speed: 17.5-186.7 R/Min
Applicable Industries: Hotels, Manufacturing Plant
Customized Support: OEM, ODM

###

Customization:

###

NRV
030
040
050
063
075
090
110
130
150
B
20
23
30
40
50
50
60
80
80
D1
9 j6
11 j6
14 j6
19 j6
24 j6
24 j6
28 j6
30 j6
35 j6
G2
51
80
74
90
105
125
142
162
195
G3
45
53
64
75
90
108
135
155
175
I
30
40
50
63
75
90
110
130
150
b1
3
4
5
6
8
8
8
8
10
f1
M6
M6
M8
M8
M10
M10
M12
t1
10.2
12.5
16
21.5
27
27
31
33
38

###

NRV-NMRV
030-040
030-050
030-063
040-075
040-090
050-105
050-110
063-130
063-150
B
20
20
20
23
23
30
30
40
40
D1
9 j5
9 j6
9 j6
11 j6
11 j6
14 j6
14 j6
19 j6
19 j6
G2
51
51
51
60
00
74
74
90
90
I
10
20
33
35
50
60
60
67
87
b1
3
3
3
4
4
5
5
6
6
f1
M6
M6
M6
M6
t1
10.2
10.2
10.2
12.5
12.5
16
16
21.5
21.5

###

NMRV040 Output
D H8
b
t
18
(19)
6
(6)
20.8
(21.8)
(..)Only on request

Weight without motor:2.3kg
Input size (Pm, Dm, bm, tm)
US $10-100
/ Piece
|
100 Pieces

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

Output Speed: 17.5-186.7 R/Min
Applicable Industries: Hotels, Manufacturing Plant
Customized Support: OEM, ODM

###

Customization:

###

NRV
030
040
050
063
075
090
110
130
150
B
20
23
30
40
50
50
60
80
80
D1
9 j6
11 j6
14 j6
19 j6
24 j6
24 j6
28 j6
30 j6
35 j6
G2
51
80
74
90
105
125
142
162
195
G3
45
53
64
75
90
108
135
155
175
I
30
40
50
63
75
90
110
130
150
b1
3
4
5
6
8
8
8
8
10
f1
M6
M6
M8
M8
M10
M10
M12
t1
10.2
12.5
16
21.5
27
27
31
33
38

###

NRV-NMRV
030-040
030-050
030-063
040-075
040-090
050-105
050-110
063-130
063-150
B
20
20
20
23
23
30
30
40
40
D1
9 j5
9 j6
9 j6
11 j6
11 j6
14 j6
14 j6
19 j6
19 j6
G2
51
51
51
60
00
74
74
90
90
I
10
20
33
35
50
60
60
67
87
b1
3
3
3
4
4
5
5
6
6
f1
M6
M6
M6
M6
t1
10.2
10.2
10.2
12.5
12.5
16
16
21.5
21.5

###

NMRV040 Output
D H8
b
t
18
(19)
6
(6)
20.8
(21.8)
(..)Only on request

Weight without motor:2.3kg
Input size (Pm, Dm, bm, tm)

Types of Vehicle Gearboxes

In a vehicle, there are many types of gearboxes available. There are planetary gearboxes, Coaxial helical gearboxes, and skew bevel helical gearboxes, among others. In this article, we’ll cover all of them and help you determine which type of gearbox would be right for your vehicle. Also, we’ll discuss how each differs from the others.
gearbox

planetary gearbox

A planetary gearbox is composed of three main components: a sun gear, an input bevel gear, and an output shaft. A planetary gearbox can have different output torques and ratios. The basic model of a planetary gearbox is highly efficient and transmits 97% of the power input. There are several kinds of planetary gearboxes, depending on the type of operation. In general, there are three types: the simple, the intermediate, and the complex.
The price of a planetary gearbox can vary a lot, and it’s important to know what you’ll need. Different manufacturers produce different planetary gearboxes, so check with a manufacturer to see what they have available. Make sure to check the quality of the planetary gearbox before making a final purchase. In addition, be sure to compare the prices and the availability of a particular product. A quality planetary gearbox will provide years of trouble-free operation and will not break your bank.
Planetary gears feature an integer number of teeth. Each planet has teeth that must mesh with its ring or sun. The number of planets, ring, and tooth count of each gear determine whether the teeth mesh. Some planets have fewer teeth than others, so they mesh better than others. However, compound planets can be more flexible and achieve higher reduction ratios. If you’re looking for a planetary gearbox for your next project, consider getting in touch with a manufacturer who specializes in this technology.
When it comes to construction, a planetary gearbox is no exception. It’s extremely important to choose the right planetary gear for your application, because an imbalance in the planet gear can cause increased wear and failure. Moreover, the compact size of a planetary gear ensures maximum heat dissipation. However, a planetary gear box may require cooling in some applications. A planetary gearbox will make your life easier, and it will give you years of trouble-free operation.

Straight bevel helical gearbox

The Straight bevel helical gearbox has a number of advantages, but it has a relatively short manufacturing process. Its most popular application is in the automotive industry, where it is used in many types of vehicles. Other applications include heavy and light equipment and the aviation and marine industries. Below is a brief introduction to this gearbox type. Read on to learn about its benefits. This type of gearbox is one of the easiest to manufacture.
The spiral bevel gear has larger teeth than straight bevel gears, resulting in a smoother, quieter rotation. It can handle high-speed heavy loads with less vibration. Spiral bevel gears are classified by their tooth form and cutting method. Straight bevel gears are easier to design and manufacture, but spiral bevel gears are more expensive. Both designs are suitable for high-speed, heavy-load operations, and general manufacturing applications.
In addition to being easy to install, the modular bevel gears have many advantages. They have an exceptionally high degree of interchangeability and feature the highest standards of component integrity. They can also be tailored to meet your specific requirements. The advantages of this gearbox type include high precision, optimum performance, and low noise. And because they are modular, they can be produced in a variety of finishes. These include stainless steel, titanium, and bronze.
Straight bevel helical gearbox manufacturers are committed to a high degree of precision in their designs. The radii, torques, and tooth profiles of straight bevel gears are more precisely measured than those of cylindrical bevel gears. The same calculations are used for all traditional bevel gear generators. This ensures that your 5-axis milled bevel gear sets have the same calculations and layout.
gearbox

Coaxial helical gearbox

The Coaxial helical gearbox is a highly efficient transmission system that is well suited for light-duty applications. Compared to spur-type gearboxes, the real pitch of a Coaxial helical gearbox is low at all helix angles. This is because the coaxial type has the same number of teeth and center gap as the spur gearbox. Coaxial helical gearboxes also have a smaller footprint and are compact.
Several nations have implemented lockdown regulations for Industrial Gearbox trade, threatening the global economy. Several factors have been implicated in COVID-19, including supply chain, market, and financial markets. Experts are monitoring the situation globally and project remunerative prospects for gearbox manufacturers after the crisis. This report depicts the latest scenario and offers a comprehensive analysis of COVID-19’s impact on the entire industry.
This Coaxial helical gearbox features a compact structure and high precision gear. Its three-stage design combines two-stage gears with a single-stage gear, forging high-quality alloy steel for high precision and durability. The gears are serially-designed for easy interchangeability. They are also available in high-frequency heat-treated steel. A Coaxial helical gearbox is the perfect solution for many applications.
Coaxial helical gearboxes have the added benefit of using cylindrical gears instead of shafts. They operate quietly, and have more surface area to interact with. Their fixed angles make them suitable for heavy-duty applications, like in conveyors, coolers, and grinders. Compared to other gearbox types, Helical gearboxes have higher power-carrying capacity. Listed below are the benefits of a Coaxial Helical Gearbox

Skew bevel helical gearbox

A Skew bevel helical gear box is a common type of industrial gearbox. These gearboxes are rigid and compact and can be used in a variety of applications. They are commonly used in heavy-duty applications such as grinding mills, conveyors, and coolers. They are used in many applications to provide rotary motions between non-parallel shafts. They also have the added benefit of high-efficiency in a variety of industries.
Skew bevel helical gear boxes are suitable for heavy loads and are monolithic in construction. This type of gearbox combines the benefits of bevel and helical gears for right-angle torque, which makes it a popular choice for heavy-duty applications. In addition to being a robust and reliable gearbox, these gearboxes are highly customizable and can meet almost any industrial need.
To maximize the efficiency of bevel gears, FE-based tooth contact analysis is used to develop a sophisticated geometry optimization algorithm. The software also allows users to define optimal flank topography by introducing application-specific weightings for specific load levels. With this data, a manufacturing simulation is conducted to determine the best variant. A robust variant combines the benefits of efficiency, load-carrying capacity, and low excitation behavior.
The helical gear can be angled at 90 degrees. This is similar to a spur gear but produces less noise. It can achieve a nine-to-one speed reduction with one stage. However, a helical gear requires a larger driver gear for higher reductions. This gearbox is suitable for speeds from 1:1 to three times. They are often used in the manufacture of motors and generators.
gearbox

Extruder helical gearbox

An extruder helical gearbox is one of the most common industrial gears. It is compact in size and low-power consuming, making it ideal for heavy-duty applications. Extruder helical gearboxes are suitable for a variety of industrial applications, including cement, plastics, rubber, conveyors, and coolers. In addition to its use in plastics and rubber manufacturing, this gearbox is also useful in other low-power applications such as crushers, coolers, and conveyors.
CZPT SG series Extruder Helical Gearboxes are available in Single Screw and Twin Screw Variations. These gears feature a compact design, high power density, and long service life. Axial bearing housing and thrust bearings are mounted on the input shafts. Extruder helical gearboxes can be installed in various positions, including horizontal, vertical, and inclined.
Helicoidal gears are often produced in a modular manner. This design provides multiple benefits, including engineering and performance advantages, modular production, and the highest level of component integrity. A single helical gearbox can be assembled into a larger gearbox if needed, but modular production ensures consistent performance and economy. This modular design is also cost-effective. It is a versatile and reliable solution for a wide range of applications.
In addition to its efficiencies, Extruder helical gearboxes also have a low noise profile. They have no squeal sounds, and they are silent when running. They can transfer more power than conventional gearboxes. This type of gear has been used in the manufacturing of high-quality plastic products for years. They are often used for applications in automotive transmissions. Aside from being quiet, helical gears have higher contact levels and lower vibration.

China Nmrv Series Worm Gear Reducer Shaft Motor Speed Bevel Helical Gearbox     with Best Sales China Nmrv Series Worm Gear Reducer Shaft Motor Speed Bevel Helical Gearbox     with Best Sales
editor by czh 2022-12-01

in Hanoi Viet Nam sales price shop near me near me shop factory supplier Transmission Reducer Parallel Shaft Double Single Bevel Inline Helical Spur Cross Cycloidal Geared Gearbox with Motor manufacturer best Cost Custom Cheap wholesaler

  in Hanoi Viet Nam  sales   price   shop   near me   near me shop   factory   supplier Transmission Reducer Parallel Shaft Double Single Bevel Inline Helical Spur Cross Cycloidal Geared Gearbox with Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

Our professionals and engineers have 23 several years of Encounter in the Bearing Industry. Hangzhou EPG Co.,Ltd. , was founded in November, 1997. With its five wholly owned subsidiaries. EPG has been productively accredited by ISO9002 Top quality Management Method, ISO9001 Quality Management Technique, API certification, ISO/TS16949:2002 and ISO10012 measurement administration system.

EPTT EPTT PXiHu (West EPT) Dis.Hu (West EPT) Dis.lel Shaft double solitary EPTTl inline EPTcal spur cross Cycloidal EPTed EPTT with EPT

  in Hanoi Viet Nam  sales   price   shop   near me   near me shop   factory   supplier Transmission Reducer Parallel Shaft Double Single Bevel Inline Helical Spur Cross Cycloidal Geared Gearbox with Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Hanoi Viet Nam  sales   price   shop   near me   near me shop   factory   supplier Transmission Reducer Parallel Shaft Double Single Bevel Inline Helical Spur Cross Cycloidal Geared Gearbox with Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

in Yekaterinburg Russian Federation sales price shop near me near me shop factory supplier 3 Phase 220V 380V Bevel Helical Worm Helical Solid Shaft Hollow Shaft AC Right Angle Gear Motor manufacturer best Cost Custom Cheap wholesaler

  in Yekaterinburg Russian Federation  sales   price   shop   near me   near me shop   factory   supplier 3 Phase 220V 380V Bevel Helical Worm Helical Solid Shaft Hollow Shaft AC Right Angle Gear Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

The group is focused on producing all range of standard roller chains and sprockets, gears & gearboxes, this sort of as conveyor chain & sprockets , stainless steel chain, agricultural chain and has not just marketed its items all above china, but also marketed much more than 65% merchandise to oversees, which includes Europe, The usa, South-east Asia, and it also has established up storage logistics in places like Europe. We are hunting ahead to developing profitable organization associations with new customers about the world in the future. we provide chromed bar and tubes for hydualic and pheumatic cylinders. 3 Phase 220V 380V EPTTl EPTcal worm helical strong shaft hollow shaft AC RigEPTT Angle EPT EPT

Attributes:
1. Compact construction and basic assembly
2. Vast pace ranges and higher torque
three. Lower noise, good sealing functionality, higher efficiency
four. Steady and secure, EPTT life span, EPT
five. Multi-composition, a variety of assembling approaches

Item image:

Specification:

ANG EPTcal EPT EPT
Design R17 ~ 187, F37-177, K37-187, S37-ninety seven
Input EPTT .06kw ~ 250kw
Enter velocity 750rpm ~ 3000rpm
Reduction ratio 1/1.three ~ 1/27000
Input motor AC (one phase or three phase) / DC / BLDC motor
Install type Foot / Reliable shaft / Hollow shaft / Output flange #8230
Performance ninety four% ~ ninety eight % for R F K sequence
EPT of housing die-solid EPT / Forged iron / Stainless metal
EPT of EPT Exact grinding, course six
Warmth treatment method Carburizing and quenching
Equipment Brake / Flange / EPT adapter / Torque arm #8230

FAQ

Q: Can you make the EPT motor with customization?
A: Sure, we can customise for every your ask for, like EPTT, voltage, pace, shaft measurement, flange, terminal box, IP grade, etc.

Q: Do you offer samples?
A: Of course. Sample is offered for screening.

Q: What is your MOQ?
A: It is 1pcs for the starting of our organization.

Q: What is your guide time?
A: StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd merchandise need 5-30days, a bit EPTTer for EPT goods.

Q: Do you offer EPT help?
A: Yes. Our business have design and deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment team, we can supply EPT support if you
want.

Q: How to ship to us?
A: It is accessible by air, or by sea, or by practice.

Q: How to shell out the money?
A: T/T and L/C is favored, with different currency, incXiHu (West EPT) Dis.Hu (West EPT) Dis. USD, EUR, RMB, etc.

Q: How can I know the merchandise is appropriate for me?
A: gt1ST affirm drawing and specification gt2nd test sample gt3rd begin mass manufacturing.

Q: Can I occur to your organization to go to?
A: Of course, you are welcome to visit us at any time.

Q: How shall we speak to you?
A: You can ship inquiry directly, and we will reply in 24 several hours.

  in Yekaterinburg Russian Federation  sales   price   shop   near me   near me shop   factory   supplier 3 Phase 220V 380V Bevel Helical Worm Helical Solid Shaft Hollow Shaft AC Right Angle Gear Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Yekaterinburg Russian Federation  sales   price   shop   near me   near me shop   factory   supplier 3 Phase 220V 380V Bevel Helical Worm Helical Solid Shaft Hollow Shaft AC Right Angle Gear Motor manufacturer   best   Cost   Custom   Cheap   wholesaler