China High Torque K Series Helical Bevel Gear Motor Reducer Gearbox crossed helical gearbox

Item Description

High torque K series helical bevel gear motor reducer gearboxne

Item Description


Description: K Collection Helical Bevel Gearbox

Overview
(1) Input mode: coupled motor, belted motor, enter shaft or relationship flange.
(2) Correct angle output.
(3) Compact structure.
(4) Rigid tooth experience.
(5) Carrying higher torque, higher loading potential.
(6) Large precision gear, making sure the device to operate stably, clean transmission.
(7) Minimal sound, lengthy lifespan.
(8) Large overlap coefficient, abrasion resistant.

Detailed Images

K collection gear units are available in the subsequent patterns:
KAZ..Y..Quick-flange-mounted helical-bevel gear units with hollow shaft
K…Y…Foot-mounted helical-bevel equipment units with sound shaft
KAT…Y…Torque-arm-mounted helical-bevel equipment units with hollow shaft
KAB…Y…Foot-mounted helical-bevel equipment units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S…Shaft enter helical-bevel gear units
KA…Y…Helical-bevel gear models with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y..Combinatorial helical-bevel equipment units
KF…Y…Flange-mounted helical-bevel gear models with sound shaft
KA(K, KF ,KAF ,KAZ)S…R…Shaft enter combinatorial helical-bevel gear units
KAF…Y…Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y…When equipping the user’s motor or the unique 1 ,the flange is necessary to be related

The weights are imply values, only for reference.
Optimum torque signifies the largest 1 of the optimum torque related to the different ratio for the specified dimensions.

Rated Electricity:.18KW~200KW
Rated Torque:Up to 50000N.m
Equipment Arrangement:Bevel Helical Hardened Gearbox
Enter Velocity:50HZ or 60HZ of 4Pole,6Pole and 8pole motor
Ratio:5.36~192.eighteen

Solution Parameters

Structure:

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted .eighteen-200kw .1-270r/min Up to 50000Nm

Input energy score and greatest torque:

Measurement
 
38 48 58 sixty eight seventy eight 88 98 108 128 158 168 188
Construction
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power score(kw)
 
.18~
3.
.eighteen~
3.
.eighteen~
5.five
.eighteen~
five.5
.37~
11
.75~
22
1.3~
30
three~
forty five
seven.5~
90
11~
160
11~
two hundred
18.5~
200
Ratio five.36~
106.38
five.eighty one~
131.87
six.57~
one hundred forty five.fifteen
seven.fourteen~
forty four.79
7.22~
192.18
seven.19~
197.27
eight.95~
a hundred seventy five.forty seven
eight.74~
141.ninety three
eight.68~
146.07
12.66~
one hundred fifty.03
17.35~one
sixty four.forty four
17.ninety seven~
178.37
Greatest
Torque(N.m)
 
two hundred 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

Gear device fat:

Dimensions
 
38 48 58 sixty eight seventy eight 88 98 108 128 158 168 188
Fat
 
eleven twenty 27 33 57 eighty five one hundred thirty 250 380 610 1015 1700

 

Packaging & Delivery

Firm Profile

Right after Income Service

Pre-sale solutions 1. Decide on tools product.
2.Layout and manufacture items according to clients’ special requirement.
three.Practice specialized private for customers
Services in the course of marketing one.Pre-check out and acknowledge merchandise in advance of supply.
two. Help customers to draft resolving plans.
After-sale solutions 1.Aid clients to put together for the first development plan.
two. Train the 1st-line operators.
3.Get initiative to eliminate the difficulty swiftly.
four. Give technical exchanging.

FAQ

1. How to decide on a gearbox which fulfills our need?
You can refer to our catalogue to pick the gearbox or we can aid to decide on when you provide
the technological information of needed output torque, output speed and motor parameter etc.
two. What information shall we give ahead of inserting a obtain get?
a) Sort of the gearbox, ratio, input and output kind, input flange, mounting placement, and motor details and so forth.
b) Housing coloration.
c) Acquire amount.
d) Other specific requirements.
3. What industries are your gearboxes being utilised?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,computerized storage gear, metallurgy, environmental safety, logistics and and so forth.
4.Do you offer any checking out?
Yes! We sincerely invite you to visit us! We can select you from airport, railway station and so on. Also, we can prepare housing for you. Please allow us know in sophisticated.
five.Is your top quality good?
Good quality by no means notify lies, we’re theprofessional manufacturer and exporter of gear reducer and motor in Asia, who has been offered license considering that 1982. Also, we had reached ISO9001 and CE Certification amongst all producers.

 

Contact:

If you are interested in our merchandise, welcome you make contact with me.
Our team will support any need you may have.

Application: Motor, Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted 0.18-200kw 0.1-270r/min Up to 50000Nm

###

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Structure
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw)
 
0.18~
3.0
0.18~
3.0
0.18~
5.5
0.18~
5.5
0.37~
11
0.75~
22
1.3~
30
3~
45
7.5~
90
11~
160
11~
200
18.5~
200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~
44.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~1
64.44
17.97~
178.37
Maximum
Torque(N.m)
 
200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

###

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Weight
 
11 20 27 33 57 85 130 250 380 610 1015 1700

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.
Application: Motor, Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted 0.18-200kw 0.1-270r/min Up to 50000Nm

###

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Structure
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw)
 
0.18~
3.0
0.18~
3.0
0.18~
5.5
0.18~
5.5
0.37~
11
0.75~
22
1.3~
30
3~
45
7.5~
90
11~
160
11~
200
18.5~
200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~
44.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~1
64.44
17.97~
178.37
Maximum
Torque(N.m)
 
200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

###

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Weight
 
11 20 27 33 57 85 130 250 380 610 1015 1700

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

What Is a Helical Gearbox?

Basically, a gearbox is a rotating circular machine part that consists of toothed components, which mesh together. Its function is to transfer speed and torque to other parts of the machine. It is also similar to a lever, and operates on the same principle.helical gearbox

Double helical gears

Having a helical gearbox has many advantages, including higher efficiency, high strength, and a superior gear system. However, it has its drawbacks. One of these drawbacks is the axial thrust. Axial thrust is not a problem with single helical gears, but it is a problem with double helical gears.
In double helical gears, there are two sets of teeth that are arranged in a V-shape. In one set of teeth, there is a groove that enables the axial force to be cancelled out. The groove eliminates the need for thrust bearings and allows for efficient handling of high capacity power transmission.
Aside from the axial thrust, there are also issues with face contact. Asymmetric load sharing and oscillation put substantial alternating loads on the shaft bearings. These alternating loads can lead to early bearing failure.
Fortunately, helical gears are smoother than spur gears, which means they can withstand more load. They also have greater pitch circle diameter than spur gears. However, they are limited in their scope. The pitch error distribution on the helical gears is typically limited to 50 mm peak-to-peak amplitude. It is important to control the phase difference of oncoming gears with high accuracy.
Typically, the helical gears that are used in a gear box are assembled from the same module. This allows for interchangeability of components and economical construction. A normal module set can use the same tooth-cutting tools that are used for spur gears.
Double helical gears are used in power transmission in fluid pumps and gas turbines. They are also commonly used in planetary reduction gear boxes for engines in civil aviation.
Generally, double helical gears are larger than single helical gears. They are typically generated from a special generator. They are also more expensive.
However, manufacturers are looking to find gears that are more convenient to use. One solution is to manufacture double helical gears on a multi-tasking machine tool. This allows the gear to be machined in complicated shapes.
The multi-tasking machine tool can also modify the tooth surface. This is useful for 3D printing helical gears with a high level of accuracy.helical gearbox

Crossed-axis helical gears

Several factors affect the performance of crossed-axis helical gears. One of the important factors is the position of the gears on the cross shaft. The gears will not perform properly if they are not oriented in a different direction.
Crossed-axis helical gears have a special situation, in which they will not function properly if the gears are oriented in the same direction. This is especially true for automobile oil pump/distribution shafts. Depending on the situation, gears will operate as a normal helical gear or as a spur gear.
Compared to spur gears, crossed-axis helical gears have relatively higher capacity. However, the transverse contact ratio of these gears is reduced. This decrease is dependent on the pressure angle. The pressure angle affects the curvature radii of the teeth. In addition, the length of the contact line is reduced. This shortens the efficiency of the gear.
Helix angle of crossed-axis helical gears is 45 degrees. It may be a left-handed or a right-handed gear. The pitch circle diameter of a helical gear may be big compared to that of a spur gear. This is due to the fact that the gears are cut at an angle to the shaft.
In the axial direction, the meshing of helical gears is very similar to spur gears. However, there are a few design rules to optimize these gears.
The first rule is that the gears must be staggered in opposite directions. If the gears are not staggered, the contact lines cannot be changed.
The second rule states that the pitch of a helical gear is dependent on its helix angle. It is possible to calculate the pitch circle of a helical gear, by integrating along the face width. In addition, the length of the contact lines decreases as the pressure angle increases. However, this decrease is not as large as that of a spur gear.

Right angle helical gears

Choosing a right angle helical gearbox can be difficult. With so many types, sizes, and configurations to choose from, it can be difficult to figure out which one is right for your application. The key to choosing the right gearbox is understanding your application and what factors are most important to you.
For example, if you are looking for a gearbox that can be used in a high-speed, high-torque application, the most important consideration is the efficiency of the product. Right-angle gearboxes are compact and easy to maintain, making them ideal for high-torque applications.
Some applications that require high-torque gears include pulp and paper manufacturing, food processing, mining, and car washes. Some of the advantages of right angle gears include high efficiency, low maintenance, and low noise. If you are in the market for a right angle helical gearbox, make sure to select a supplier that can provide you with a wide range of options.
Right-angle helical gearboxes come in several different bevel configurations. Spiral bevel gears require precision and are difficult to manufacture. However, they can be used interchangeably. Spiral miter gears are designed to rotate in the same direction as the input shaft, which helps ensure a smooth, direct transfer of power.
If you are considering a helical gearbox for a high-speed application, you will need to know your preferred input/output ratio. The standard ratios are 1:1 and 2:1. If you need a step-up ratio, you can install an additional output shaft opposite the input shaft.
Other benefits include lower running noise, superior strength, and durability. Because they are made of larger teeth, helical gears are less likely to wear out. Also, helical gears provide higher power carrying capacity.
To determine which type of right angle gearbox is best suited for your application, you should discuss your needs with your supplier. They should be able to offer a wide range of options, including custom solutions. They should also provide you with a list of past clients and online reviews.
To find a right angle helical gearbox that can meet your needs, it’s important to understand the various design features. For example, you should make sure that your gearbox has a self-locking capability, which means that the load cannot drive the worm. Having a self-locking gearbox also means that you do not need to install a braking system.helical gearbox

Spiral teeth

Using helical gearboxes to drive a motor car or truck is an efficient method of power transmission. However, the efficiency of this method depends on the helix angle of the gear. The helix angle is the angle that the gear teeth are cut at.
Helical gearboxes may be of different helix angles, depending on the specific gear set. The helix angle can vary between 15 and 30 degrees. This is important because the helix angle has a significant effect on the position of tooth contact. If the contact is not in a proper position, then there will be a large amount of vibration. This will affect the speed of the gear.
Helical gearboxes can be of two types: crossed axis and parallel axis. Crossed axis gears are usually used to connect parallel shafts. They have the same center gap as spur gears. On the other hand, parallel axis gears are usually used to drive a motor. The difference between the two types of gearboxes is their design and arrangement.
In addition to the helix angle, the gears may have different fillet, teeth, and radius. This means that the gear will have different NVH characteristics. In addition, there are different types of spiral teeth that may be used in the gearbox.
Hypoid gears are also similar to spiral bevel gears, but they differ in that the axes of the gear shaft do not intersect the axis of the hypoid gear. The hypoid gear exerts a very high thrust load on the bearings.
When compared to a straight bevel gear, the hypoid gear experience a smoother, less noisy operation. They also produce less shock loading.
Spiral bevel gears are also designed to produce less vibration. They are also more cost-effective. However, they require a larger diameter to transmit the same torque. This can lead to a reduced mechanical efficiency and lower fuel economy.
The best spiral bevel gears can carry a higher thrust load than straight teeth. This is why they are preferred for applications that require heavy load efficiency.
They are also appreciated for their NVH characteristics. They are also a quieter option for applications that require high speed. Helical gears can be used in many different industries. The food, automotive, and oil industries are examples of these types of gears.
China High Torque K Series Helical Bevel Gear Motor Reducer Gearbox     crossed helical gearboxChina High Torque K Series Helical Bevel Gear Motor Reducer Gearbox     crossed helical gearbox
editor by czh 2023-01-08